[Nut-upsdev] Re: [Nemo-devel] nuts status page

[Bruce Allen]

Hi Kjell,

Thanks very much for the quick reply.  I'm not sure if Paul's reply to you 
made it onto the NUT mailing list(s) so I'm duplicating it: we're using 
bcmxcp.

Do you think the fix require code modifications/development, or just 
changes to our configuration/setup parameters?


Cheers,
 	Bruce

On Thu, 3 Aug 2006, Kjell Claesson wrote:

> Hi Bruce,
> tor 2006-08-03 klockan 11:59 -0500 skrev Bruce Allen:
>> Adam: Thanks for putting up this page.  But something is wrong.  In
>> particular, our Powerware 9135 is a three phase UPS system with THREE 480
>> volt outputs.  So the displayed voltage is not correct -- in fact there
>> should really be THREE voltages displayed, all around 480v.
>>
>> Nut developers: I am copying the NUT mailing list to see if anyone can
>> suggest how to fix this.  NUT developers, see the following page to see
>> the problem: http://nemo.phys.uwm.edu/cgi-bin/upsstats.cgi .  Instead of
>> displaying a single voltage of 276 VAC we should see three voltages of
>> around 480 VAC.
>>
>> Cheers,
>>  	Bruce
>
> Yes this can be fixed.
>
> Are you using the bcmxcp driver or is it monitored by snmp?
>
> Regards
> Kjell
>
>