[Nut-upsdev] RE: [Nut-upsuser] SOS : Help needed for UPSCentralionBlazer2000VAUSB

[Guillaume JAOUEN]

Hello Carlos,

As you're working on a generic megatec protocol driver, I want to know if
this driver will work with USB UPS.

Regards,
Guillaume JAOUEN.

-----Message d'origine-----
De : Kjell Claesson [mailto:kjell.claesson at telia.com] 
Envoyé : vendredi 21 avril 2006 18:58
À : Guillaume JAOUEN
Cc : 'Arnaud Quette'; 'Carlos Rodrigues'; nut-upsdev at lists.alioth.debian.org
Objet : Re: [Nut-upsdev] RE: [Nut-upsuser] SOS : Help needed for
UPSCentralionBlazer2000VAUSB

Ok Guillaume,

It is Megatec protocol.

It sends Q1<cr> and answers with
(227.2 227.2 227.2 038 50.1 13.5 25.0 00001001<cr>

And if you check
http://eu1.networkupstools.org/protocols/megatec.html
it matches.

And now, ho has time to code ?

Kjell


fre 2006-04-21 klockan 17:18 +0200 skrev Guillaume JAOUEN:
> Hello,
> 
> As I wish to help you the most I can in order to get a driver for
Centralion
> Blazer USB UPS, you will find a log of the USB activity of this UPS made
> with SnoopyPro 0.22.
> 
> I follow this events procedure :
> 
> Start of the log : UPS status normal, the following data was delivered by
> the UPS :
> UPS Model : LIN-INT
> UPS Port : USB
> UPS temperature : 25,0°C
> 
> AC INPUT :
> Voltage : between 226 and 227 V
> 
> AC OUTPUT :
> OUTPUT LOAD : 38%
> OUTPUT VOLTAGE : 225 V
> OUTPUT FREQUENCY : 50,1 HZ
> 
> BATTERY :
> VOLTAGE : 13,0 V
> STANDARD VOLTAGE : 12,0 V
> CAPACITY : 100%
> 
> 1 - AC INPUT shutdown until battery go to 62% of charge
> 2 - AC INPUT back 
> 3 - Launch from the monitoring software the command for a self-test of 10
> sec (I wait until I get the success message for the test)
> 4 - I disable the audible warning
> 5 - I enable the audible warning
> 
> End of the log.
> 
> Please let me know if you need more things to be done.
> 
> Regards,
> Guillaume JAOUEN.