[Nut-upsdev] tripp lite smart2200RMXL2U error reading protocol

[Arjen de Korte]

Lance Thomas wrote:
> I tried the new usbhid-ups from the rev 900 of the svn and after
> creating a few links to make it work in the gentoo framework I am
> connected and receiving data from the tripp lite ups.  I will be
> checking to make sure the data is correct, but here is what I received
> from upsc tripplite at localhost
> 
> battery.charge: 100
> battery.charge.low: 10
> battery.charge.warning: 30
> battery.temperature: 33
> battery.type: PbAC
> battery.voltage: 5.4

The above is a known issue. The battery voltage is off by a factor of
10, so it should read 54.0 (which is a typical voltage for a 48V battery
string. All other values look fine.

Best regards, Arjen