[Nut-upsdev] support for newer mustek powermust model 06da:0003

Carlos Rodrigues carlos.efr at mail.telepac.pt
Mon Nov 26 14:25:40 UTC 2007

On Nov 26, 2007 1:34 PM, Arjen de Korte <nut+devel at de-korte.org> wrote:
> OK, I'll throw in the patch you provided and then we'll leave it that
> way for now. Thanks for your efforts in making this work. We've seen
> quite a number of requests for support of the VendorID:ProductID
> combination, so it is nice that we can support this now.

My PowerWalker VI 600 also has a phoenixtec device, and I can say that
megatec_usb now works.

> Two things that are open
> 1) Could you post the output of 'upsc <upsname>'?

battery.charge: 87.5
battery.voltage: 13.20
battery.voltage.nominal: 12.0
driver.name: megatec_usb
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.version: 2.3.0-1154:1163M
driver.version.internal: 1.5.9
input.frequency: 50.1
input.voltage: 231.1
input.voltage.fault: 231.1
input.voltage.maximum: 232.0
input.voltage.minimum: 230.2
output.voltage: 230.7
output.voltage.nominal: 230.0
ups.beeper.status: disabled
ups.delay.shutdown: 0
ups.delay.start: 2
ups.load: 30.0
ups.mfr: unknown
ups.model: unknown
ups.serial: unknown
ups.status: OL
ups.temperature: 25.0

> 2) Have you checked what happens after sending the command 'upsmon -f
> fsd'? The system should reboot with the mains to the UPS plugged in and
> just shutdown (waiting for power) with the mains unplugged.

I'll check this later in the afternoon.

Carlos Rodrigues

More information about the Nut-upsdev mailing list