[Nut-upsdev] Krauler UP-D1200VA

[Vamp]

Hello, Carlos!
You wrote to <nut-upsdev at lists.alioth.debian.org> on Sun, 30 Sep 2007 
12:40:56 +0100:

> On 9/30/07, Arjen de Korte <nut+devel at de-korte.org> wrote:


> This line comes from another user, who had reported it a while ago and
> whose mail had sit forgotten in my mailbox for ages.

>> We should probably expand the matching mechanism here, to include the
>> information from the 'I' command. This won't always work however (since
>> some UPS'es don't return anything useful here), but if yours does it
>> would be an option.

> I don't want to go that way. Keeping up a table for all possible
> output from the "I" command would be too much work, and the gain would
> be arguable, at best.

I agree with that.

I doubt that the original Megatec software uses vendor/model information 
because I have 2 Upsilon2000 versions: 3.22 (March 2004) and 3.30 (2005) 
while Krauler D-series UPSes was announced in May 2006. Both Upsilon2000 
versions indicate the same charge percentage.

But I believe that the correct range for 23.5V UPSes should be 19.6-26.7 
because it matches both the Upsilon2000 indication and real UPS status.

> BTW, the unused "low battery" value is there just in case it proves
> useful in the future, to make changes to the way the percentage is
> calculated. It's better to ask for this information  now, than not
> having it later.

But there is the low battery flag. And Upsilon2000 calculates percentage in 
the same way.
Anyway, I confirm that the low battery voltage is 22.2 (actually "low 
battery" beep appears at 22.3-22.2 and low battery flag appears at 
22.2-22.1).

With best regards, Vamp.  E-mail: admin at vampik.ru