[Nut-upsdev] Problems with nut on new openSuSE 11.1 (same ecstasy_ups)

[David C. Rankin]

Arjen de Korte wrote:
> Citeren "David C. Rankin" <drankinatty at suddenlinkmail.com>:
> 
>> Any luck yet on the voltage fix for the Cyber Power UPS CP1000AVRLCD? I'm
>> still greeted by 'battery.voltage: 20.3' each time I check. Just
>> thought I'd
>> ask. Thanks.
> 
> This change was comitted to the trunk on Dec 15 (r1627), so if you
> upgrade to the development version, this should be OK now.
> 
> Best regards, Arjen

Arjen,

	Mayday -- We still have voltage issues is 1715:

[22:54 nirvana/usr/local/ups] # bin/usbhid-ups -DD -a nirvana_ups
Network UPS Tools - Generic HID driver 0.34 (2.4.0-pre1-1715)
USB communication driver 0.30
debug level is '2'
upsdrv_initups...
Checking device (0000/0000) (002/001)
- VendorID: 0000
- ProductID: 0000
- Manufacturer: unknown
- Product: unknown
- Serial Number: unknown
- Bus: 002
Trying to match device
Device does not match - skipping
Checking device (0764/0501) (001/002)
- VendorID: 0764
- ProductID: 0501
- Manufacturer: CPS
- Product: UPS CP1000AVRLCD
- Serial Number: unknown
- Bus: 001
Trying to match device
Device matches
HID descriptor length 387
Report Descriptor size = 387
Using subdriver: CyberPower HID 0.2

<snip>

Path: UPS.PowerSummary.Voltage, Type: Feature, ReportID: 0x0a, Offset: 0, Size:
8, Value: 20.300000


	Looks like the fix in r1627 didn't stay fixed :-(

-- 
David C. Rankin, J.D.,P.E.
Rankin Law Firm, PLLC
510 Ochiltree Street
Nacogdoches, Texas 75961
Telephone: (936) 715-9333
Facsimile: (936) 715-9339
www.rankinlawfirm.com