[Nut-upsdev] more liebert esp2 stuff

[Spiros Ioannou]

More detected parameters (attached), this time measurements for all 3
phases. I include only new discovered readings.
Multipliers are wrong right now and need to be defined, and some commands
are probably invalid/wrong, but most seem ok. I hope I find the time to
implement those on the driver. What I'm missing is a way to discern between
1phase & 3phase (output) upses.

output + read commands attached.

Also. here are  some untested ups commands (decimal, not yet tested, seem
dangerous) for the brave, not sure if relevant to nut:

ALARM_SILENCE,  1,156,2,1,1
BATTERY_TEST,  1,156,2,1,2
CANCEL,  1,156,2,1,3
OUTPUT_ON_DELAY,  1,156,2,1,4
OUTPUT_OFF_DELAY,  1,156,2,1,5
OUTPUT_OFF_MODE,  1,156,2,1,6
OUTPUT_OFF,  1,156,2,1,8
OUTPUT_ON,  1,156,2,1,9
XFER_TO_BYPASS,  1,156,2,1,10
XFER_TO_INVERTER,  1,156,2,1,11
SELF_TEST,  1,156,2,1,12
FRONT_PANEL_TEST,  1,156,2,1,13
RESET_COUNTERS,  1,156,2,1,14
RESET_SETTINGS,  1,156,2,1,15
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20100411/ea9300af/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: dbg-out.zip
Type: application/zip
Size: 6470 bytes
Desc: not available
URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20100411/ea9300af/attachment.zip>