[Nut-upsdev] UPS Trust OXXTRON 1300VA not working

[Andreas Cattelan]

Hallo all.

I tried to configure the UPS Trust OXXTRON 1300VA but i didn't succeed.

i tried the blazer_usb
<http://www.networkupstools.org/docs/man/blazer_usb.html> driver and others
but i didn't succeed.

My lsusb says

Bus 002 Device 005: ID 0925:1234 Lakeview Research
Bus 004 Device 002: ID 0781:5567 SanDisk Corp. Cruzer Blade
Bus 004 Device 004: ID 0424:2228 Standard Microsystems Corp. 9-in-2 Card
Reader
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

i'm running nut on OMV 2.1.20 Kernel 3.16.0-0.bpo.4-586

My nut.conf is:
MODE=standalone

ups.conf:
[ups]
driver = blazer_usb
port = auto

upsd.conf:
MAXAGE 15
MAXCONN 1024
LISTEN 127.0.0.1 3493

upsmon.conf:
MONITOR ups at localhost 1 monmaster 1003e2c67661fcc2bcbe2bd42b7a4c4c master
MINSUPPLIES 1
SHUTDOWNCMD "/sbin/shutdown -h +0"
NOTIFYCMD "/sbin/upssched"
POLLFREQ 5
POLLFREQALERT 5
HOSTSYNC 15
DEADTIME 15
POWERDOWNFLAG /etc/killpower
NOTIFYFLAG ONLINE SYSLOG+WALL+EXEC
NOTIFYFLAG ONBATT SYSLOG+WALL+EXEC
NOTIFYFLAG LOWBATT SYSLOG+WALL+EXEC
NOTIFYFLAG COMMOK SYSLOG+WALL+EXEC
NOTIFYFLAG COMMBAD SYSLOG+WALL+EXEC
NOTIFYFLAG SHUTDOWN SYSLOG+WALL+EXEC
NOTIFYFLAG REPLBATT SYSLOG+WALL+EXEC
NOTIFYFLAG NOCOMM SYSLOG+WALL+EXEC
NOTIFYFLAG FSD SYSLOG+WALL+EXEC
RBWARNTIME 43200
NOCOMMWARNTIME 300
FINALDELAY 5


upssched.conf:
CMDSCRIPT /usr/local/bin/upssched-cmd
PIPEFN /var/run/nut/upssched.pipe
LOCKFN /var/run/nut/upssched.lock
AT COMMOK * EXECUTE notify
AT COMMBAD * EXECUTE notify
AT REPLBATT * EXECUTE notify
AT NOCOMM * EXECUTE notify
AT FSD * EXECUTE forced-shutdown
AT NOPARENT * EXECUTE notify
AT SHUTDOWN * EXECUTE notify
AT ONLINE * CANCEL-TIMER shutdown
AT ONLINE * EXECUTE resume
AT ONBATT * START-TIMER shutdown 30
AT ONBATT * EXECUTE shutdown-warning
AT LOWBATT * START-TIMER shutdown
AT LOWBATT * EXECUTE shutdown-warning

I would like to contribute in anyway to get this working although i have
any knowledge of hardware settings.

Please let me know
i posted also in OMV forum here
http://forums.openmediavault.org/index.php/Thread/12514-NUT-settings-for-UPS-Trust-OXXTRON-1300VA/

Thanks

Regards

Andreas
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20160123/192ec88a/attachment.html>