[Nut-upsdev] SNMP Stuff/MIBs for CyberPower and APC UPSs

[Ben Kamen]

Hey all,

 I recently got an RMCARD205 for my Cyber UPS....

if I use no MIBS line in the config file, I get this:


> Network UPS Tools - UPS driver controller 2.6.5
> Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5)
> No matching MIB found for sysOID '.1.3.6.1.4.1.3808.1.1.1'!
> Please report it to NUT developers, with an 'upsc' output for your device.
> Going back to the classic MIB detection method.
> Detected PR1500LCDRTXL2Ua on host 192.168.125.10 (mib: cyberpower 0.1)
> Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5)
> Detected SMART-UPS 3000 RM on host 192.168.125.7 (mib: apcc 1.2)
> [shop] Warning: excessive poll failures, limiting error reporting
> [shop] Warning: excessive poll failures, limiting error reporting

If I use the mibs = cyberpower

it works as somewhat expected:

>
> Network UPS Tools - UPS driver controller 2.6.5
> Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5)
> Detected PR1500LCDRTXL2Ua on host 192.168.125.10 (mib: cyberpower 0.1)
> Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5)
> Detected SMART-UPS 3000 RM on host 192.168.125.7 (mib: apcc 1.2)
> [shop] Warning: excessive poll failures, limiting error reporting
> [shop] Warning: excessive poll failures, limiting error reporting


but could use updating as the upsc output is kinda lacking some desired measurements (that I get with APC) ... I see the current is 2.7.x but I'm on CentOS/RH 6.x which seems to have stalled out at 2.6.5

Does 2.7 have the newer fancy MIB and I can just compile up and install manually?

I'm assuming RH/CentOS 6 won't be getting anymore updates. :(

I'll look around some more for an RPM for 6.x

Cheers,

 -Ben


Also,

 when I go to : http://networkupstools.org/docs/man/snmp-ups.html and click on the link at the bottom: http://www.networkupstools.org/protocols/snmp/ I get a 404 error. (just an FYI)