[Nut-upsdev] SNMP Stuff/MIBs for CyberPower and APC UPSs

[Tim Dawson]

Build from source, and done . . . wasting your time looking for a less out of date RPM is pointless. . . RPM, .deb, etc are almost always downrev. . . 

- Tim

On June 10, 2017 2:06:42 PM CDT, Ben Kamen <ben at benkamen.net> wrote:
>Hey all,
>
> I recently got an RMCARD205 for my Cyber UPS....
>
>if I use no MIBS line in the config file, I get this:
>
>
>> Network UPS Tools - UPS driver controller 2.6.5
>> Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5)
>> No matching MIB found for sysOID '.1.3.6.1.4.1.3808.1.1.1'!
>> Please report it to NUT developers, with an 'upsc' output for your
>device.
>> Going back to the classic MIB detection method.
>> Detected PR1500LCDRTXL2Ua on host 192.168.125.10 (mib: cyberpower
>0.1)
>> Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5)
>> Detected SMART-UPS 3000 RM on host 192.168.125.7 (mib: apcc 1.2)
>> [shop] Warning: excessive poll failures, limiting error reporting
>> [shop] Warning: excessive poll failures, limiting error reporting
>
>If I use the mibs = cyberpower
>
>it works as somewhat expected:
>
>>
>> Network UPS Tools - UPS driver controller 2.6.5
>> Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5)
>> Detected PR1500LCDRTXL2Ua on host 192.168.125.10 (mib: cyberpower
>0.1)
>> Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5)
>> Detected SMART-UPS 3000 RM on host 192.168.125.7 (mib: apcc 1.2)
>> [shop] Warning: excessive poll failures, limiting error reporting
>> [shop] Warning: excessive poll failures, limiting error reporting
>
>
>but could use updating as the upsc output is kinda lacking some desired
>measurements (that I get with APC) ... I see the current is 2.7.x but
>I'm on CentOS/RH 6.x which seems to have stalled out at 2.6.5
>
>Does 2.7 have the newer fancy MIB and I can just compile up and install
>manually?
>
>I'm assuming RH/CentOS 6 won't be getting anymore updates. :(
>
>I'll look around some more for an RPM for 6.x
>
>Cheers,
>
> -Ben
>
>
>Also,
>
>when I go to : http://networkupstools.org/docs/man/snmp-ups.html and
>click on the link at the bottom:
>http://www.networkupstools.org/protocols/snmp/ I get a 404 error. (just
>an FYI)
>
>_______________________________________________
>Nut-upsdev mailing list
>Nut-upsdev at lists.alioth.debian.org
>http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsdev

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20170610/f87d3b54/attachment.html>