[Nut-upsdev] SNMP Stuff/MIBs for CyberPower and APC UPSs

[Manuel Wolfshant]

On 10 June 2017 23:26:47 EEST, Tim Dawson <tadawson at tpcsvc.com> wrote:
>Build from source, and done . . . wasting your time looking for a less
>out of date RPM is pointless. . . RPM, .deb, etc are almost always
>downrev. . . 
>
>- Tim
>
>On June 10, 2017 2:06:42 PM CDT, Ben Kamen <ben at benkamen.net> wrote:
>>Hey all,
>>
>> I recently got an RMCARD205 for my Cyber UPS....
>>
>>if I use no MIBS line in the config file, I get this:
>>
>>
>>> Network UPS Tools - UPS driver controller 2.6.5
>>> Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5)
>>> No matching MIB found for sysOID '.1.3.6.1.4.1.3808.1.1.1'!
>>> Please report it to NUT developers, with an 'upsc' output for your
>>device.
>>> Going back to the classic MIB detection method.
>>> Detected PR1500LCDRTXL2Ua on host 192.168.125.10 (mib: cyberpower
>>0.1)
>>> Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5)
>>> Detected SMART-UPS 3000 RM on host 192.168.125.7 (mib: apcc 1.2)
>>> [shop] Warning: excessive poll failures, limiting error reporting
>>> [shop] Warning: excessive poll failures, limiting error reporting
>>
>>If I use the mibs = cyberpower
>>
>>it works as somewhat expected:
>>
>>>
>>> Network UPS Tools - UPS driver controller 2.6.5
>>> Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5)
>>> Detected PR1500LCDRTXL2Ua on host 192.168.125.10 (mib: cyberpower
>>0.1)
>>> Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5)
>>> Detected SMART-UPS 3000 RM on host 192.168.125.7 (mib: apcc 1.2)
>>> [shop] Warning: excessive poll failures, limiting error reporting
>>> [shop] Warning: excessive poll failures, limiting error reporting
>>
>>
>>but could use updating as the upsc output is kinda lacking some
>desired
>>measurements (that I get with APC) ... I see the current is 2.7.x but
>>I'm on CentOS/RH 6.x which seems to have stalled out at 2.6.5
>>
>>Does 2.7 have the newer fancy MIB and I can just compile up and
>install
>>manually?
>>
>>I'm assuming RH/CentOS 6 won't be getting anymore updates. :(
>>
>>I'll look around some more for an RPM for 6.x
>>
>>Cheers,
>>
>> -Ben
>>
>>
>>Also,
>>
>>when I go to : http://networkupstools.org/docs/man/snmp-ups.html and
>>click on the link at the bottom:
>>http://www.networkupstools.org/protocols/snmp/ I get a 404 error.
>(just
>>an FYI)
>>
>>_______________________________________________
>>Nut-upsdev mailing list
>>Nut-upsdev at lists.alioth.debian.org
>>http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsdev

I can upload to http://wolfy
.fedorapeople
org  the packages I built for  2.7.4, if you are willing to test them. I am using them for several months.

Wolfy