[Nut-upsdev] HCL <FSP> <Champ Tower 1k> supported by <blazer_usb>

Josef Kulhánek jok at ackservice.com
Fri Jun 19 11:53:01 BST 2020


Hi everybody,

following UPS is successfuly tested.

Model: FSP Champ Tower 1k
https://www.fsp-europe.com/CS/champ-tower-series-1k2k3k/

lsusb:

Bus 002 Device 004: ID 0665:5161 Cypress Semiconductor USB to Serial


ups.conf:

[powerpal]
     driver = blazer_usb
     port = /dev/hidraw0

Mode = standalone

Distro = CentOS 8

What I did to get UPS communicate.

In terminal run as root:
ln -s /lib/udev/rules.d/62-nut-usbups.rules /etc/udev/rules.d/
udevadm control --reload-rules
udevadm trigger


output upsc:

Init SSL without certificate database
battery.charge: 100
battery.voltage: 27.24
battery.voltage.high: 26.00
battery.voltage.low: 20.80
battery.voltage.nominal: 24.0
device.mfr:
device.model: WPHVT1K0
device.type: ups
driver.name: blazer_usb
driver.parameter.pollinterval: 2
driver.parameter.port: /dev/hidraw0
driver.parameter.synchronous: no
driver.version: 2.7.4
driver.version.internal: 0.12
input.current.nominal: 4.0
input.frequency: 50.0
input.frequency.nominal: 50
input.voltage: 232.9
input.voltage.fault: 232.9
input.voltage.nominal: 230
output.voltage: 229.7
ups.beeper.status: enabled
ups.delay.shutdown: 30
ups.delay.start: 180
ups.firmware: 01060.04
ups.load: 20
ups.mfr:
ups.model: WPHVT1K0
ups.productid: 5161
ups.status: OL
ups.temperature: 27.0
ups.type: online
ups.vendorid: 0665

output upscmd -l:

Instant commands supported on UPS [powerpal]:

beeper.toggle - Toggle the UPS beeper
load.off - Turn off the load immediately
load.on - Turn on the load immediately
shutdown.return - Turn off the load and return when power is back
shutdown.stayoff - Turn off the load and remain off
shutdown.stop - Stop a shutdown in progress
test.battery.start - Start a battery test
test.battery.start.deep - Start a deep battery test
test.battery.start.quick - Start a quick battery test
test.battery.stop - Stop the battery test


Regards
PepaK



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/nut-upsdev/attachments/20200619/78c37908/attachment.html>


More information about the Nut-upsdev mailing list