[Nut-upsuser] SOS : Help needed for UPS Centralion Blazer2000VAUSB
Guillaume JAOUEN
guillaume.jaouen at rlconsultant.fr
Fri Apr 14 16:17:47 UTC 2006
Hello,
If it could help this is the lsusb -v outpout of the blazer usb UPS :
Bus 003 Device 002: ID 0665:5161
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0665
idProduct 0x5161
bcdDevice 0.02
iManufacturer 1 Cypress Semiconductor
iProduct 2 USB to Serial
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 3
bmAttributes 0x80
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 4 Sample HID
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.00
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 27
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 32
-----Message d'origine-----
De : nut-upsuser-bounces at lists.alioth.debian.org
[mailto:nut-upsuser-bounces at lists.alioth.debian.org] De la part de Kjell
Claesson
Envoyé : mercredi 12 avril 2006 23:15
À : Arnaud Quette; Carlos Rodrigues
Cc : nut-upsuser at lists.alioth.debian.org
Objet : Re: [Nut-upsuser] SOS : Help needed for UPS Centralion
Blazer2000VAUSB
Hi,
There is a slight difference between the bcmxcp_usb driver and this
ups.
If you look at the descriptor it tell you that the protocol is reported on
the interface level. The interface level say HID device.
If you look at the bcmxcp_usb driver it say vendor protocol on
the interface level.
So this should follow the usb hid device rules on the interface.
Regards
Kjell
----- Original Message -----
From: "Arnaud Quette" <aquette.dev at gmail.com>
To: "Carlos Rodrigues" <carlos.efr at mail.telepac.pt>
Cc: <nut-upsuser at lists.alioth.debian.org>
Sent: Wednesday, April 12, 2006 7:48 PM
Subject: Re: [Nut-upsuser] SOS : Help needed for UPS Centralion Blazer
2000VAUSB
Hi Carlos,
2006/4/12, Carlos Rodrigues <carlos.efr at mail.telepac.pt>:
> That hardware doesn't have a serial port right?
>
> I think that UPS could be supported if only one could configure a
> "ttyUSB" with that serial-usb converter.
>
> I (temporarily) have a model with an USB port here, and I would like
> to see if I could get it to work with "megatec"/"powermust" without
> resorting to some HID/USB magic...
>
> The protocol used seems to be the same, so the only thing needed is to
> configure a emulated serial port. Anyone has any ideas?
isn't bcmxcp_usb built on the same idea?
iirc, they were just encaps'ing the serial protocol over usb (not sure
about hid). Another example of "strange hid approach" is energizerups,
but it's hiddev only. Anyway, all this might give you some ideas ;-)
Arnaud
_______________________________________________
Nut-upsuser mailing list
Nut-upsuser at lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
_______________________________________________
Nut-upsuser mailing list
Nut-upsuser at lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
More information about the Nut-upsuser
mailing list