[Nut-upsuser] Ablerex MARS

[lonely wolf]

On 04/22/2006 05:09 AM, Carlos Rodrigues wrote:

>Measuring the voltages just means letting the UPS charge completely
>(until the bundled software says 100%) and then see what value NUT
>reports for "battery.voltage", and then unplugging the UPS from the
>wall until it goes into low battery, and check again the voltage that
>NUT is reporting.
>
Lol, I thought you need the real values, as measured on the batteries :))

Well, the battery now is at 100% and nut reports battery.voltage: 2.3
I will unplug. discharge and let you know the second value.

PS: ref the devel version
- if I use "megatec /dev/ttyS0", it starts OK, but upsd cannot connect 
to it
Apr 22 05:37:08 wolfy megatec[30742]: Startup successful
Apr 22 05:37:11 wolfy upsd[30743]: Can't connect to UPS [ablerex] 
(ablerex): No such file or directory
Apr 22 05:37:16 wolfy upsd[30744]: Startup successful

- if I use megatec -a ablerex, everything is OK:
Apr 22 05:40:36 wolfy megatec[30752]: Startup successful
Apr 22 05:40:37 wolfy upsd[30753]: Connected to UPS [ablerex]: ablerex
Apr 22 05:40:38 wolfy upsd[30754]: Startup successful

 Is this normal? I have made no change to the configuration files 
(except for replacing the model name), and now the behavior is different...
ups.conf contains:
[ablerex]
        driver = megatec
        port = /dev/ttyS0
        desc = "Web server"