[Nut-upsuser] Re: MGE Pulsar STS

[Arnaud Launay]

Le Tue, Feb 07, 2006 at 10:38:23PM +0100, Arnaud Quette a écrit:
>> I'm trying to communicate with a MGE Pulsar STS 16 using nut
> these devices communicate through the UTalk protocol, so
> mge-utalk should be applicable.

[pulsar]
        driver = mge-utalk
        port = /dev/ttyS1
        desc = "Pulsar STS"

never returns...

nw2 nut # upsdrvctl start
Network UPS Tools - UPS driver controller 2.0.0
Network UPS Tools - MGE UPS SYSTEMS/U-Talk driver 0.80.3 (2.0.0)
Startup timer elapsed, continuing...

(same with ttyS0)

Not sure if the cable is ok, though...

	Arnaud.
-- 
Perso: http://launay.org/blog/
Hébergement: http://www.nocworld.com/