[Nut-upsuser] safenet on debian etch

[Arjen de Korte]

> # /etc/init.d/nut start
> Starting Network UPS Tools:Network UPS Tools - UPS driver controller 2.0.2
> Network UPS Tools - Generic SafeNet UPS driver 0.03 (2.0.2)
>
> Communications with UPS lost: Status read failed
> Communications with UPS lost: Status read failed
> SafeNet protocol compatible UPS not found on /dev/ttyS1
> Driver failed to start (exit status=1)
>  (upsdrvctl failed).
>
> any suggestions?

Run the driver in debug mode, I already suggested this in the previous
message. The driver will be more verbose about what the cause is that it
won't run.

Regards,
Arjen
-- 
Eindhoven - The Netherlands
Key fingerprint - 66 4E 03 2C 9D B5 CB 9B  7A FE 7E C1 EE 88 BC 57