[Nut-upsuser] safenet on debian etch

[Arjen de Korte]

Omry Yadan wrote:

> Here is my output:
> 
> 
> # /lib/nut/safenet -a everpower1000 -DDDDD
> 
> Network UPS Tools - Generic SafeNet UPS driver 0.03 (2.0.2)
> 
> debug level is '5'
> 
> C : ZCADLIOPERJD
> S : [empty]
> 
> C : ZCADLIOPERJD
> S : [empty]
> 
> C : ZCADLIOPERJD
> S : [empty]
> 
> C : ZCADLIOPERJD
> S : [empty]
> Communications with UPS lost: Status read failed
> 
> C : ZCADLIOPERJD
> S : [empty]
> Communications with UPS lost: Status read failed
> SafeNet protocol compatible UPS not found on /dev/ttyS1

Either the UPS is not connected to /dev/ttyS1 (version 0.03 of the
driver does not include hardware detection, which was added in 0.04) or
your version of the Everpower 1000 UPS is not supported.

Regards, Arjen