[Nut-upsuser] Error during make: *** No rule to make target
`usb.h', needed by `tripplite-hid.o'. Stop.
Arnaud Quette
aquette.dev at gmail.com
Thu Jul 27 12:35:44 UTC 2006
Hi Phil,
2006/7/25, Phil DeBoest <phil at deboest.com>:
> Arnaud Quette wrote:
>
> > 2006/7/24, Charles Lepple <clepple at gmail.com>:
> >
> >>
> >> On 7/23/06, Kjell Claesson <kjell.claesson at telia.com> wrote:
> >> > Hi Phil.
> >> >
> >> > lör 2006-07-22 klockan 12:25 -0500 skrev Phil DeBoest:
> >> > > I downloaded the latest development tree (revision 471), ran
> >> configure
> >> > > with the following command:
> >> > > ./configure --with-user=nut --with-drivers=tripplite-hid
> >> [...]
> >> > It bombs out on the make as the target is an usb driver. But it builds
> >> > on the 'make usb'.
> >>
> >> Actually, it looks like tripplite-hid is a sub-driver of newhidups, so
> >> that could be confusing the configure script as well.
> >>
> >>
> >
> > Kjell was right. a depend update was needed, and done this afternoon.
> > Everything seems fine now.
> > But it's also right that the above call isn't good...
> >
> > Arnaud
> >
> >------------------------------------------------------------------------
> >
> >_______________________________________________
> >Nut-upsuser mailing list
> >Nut-upsuser at lists.alioth.debian.org
> >http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
> >
> >
> Wow, this is a great list. Lots of very competent help very quickly.
> Thanks, guys!
thanks a lot. That's the kind of comment that warms our little coders heart ;-)
> I downloaded the revision 474, configured with:
> ./configure --with-user=nut --with-drivers=newhidups
caution: 474 is from JD-NewConf branches, which is a special
development branch for the new configuration.
prefer to use the trunk for your test, so that you can update it
easilly later on, and test the latest mainstream developments:
svn co svn://svn.debian.org/nut/trunk
> and everything built and installed great.
>
> I still have the same problem when I try to start the driver. That,
> however, is in another thread.
>
> Thanks again.
> Phil
thanks for the feedback,
Arnaud
--
Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer - http://people.debian.org/~aquette/
OpenSource Developer - http://arnaud.quette.free.fr/
More information about the Nut-upsuser
mailing list