[Nut-upsuser] SmartLink UPS - Suggestions as to which serial driver?

[Carlos Rodrigues]

You can start megatec with "-DDD" and see if that gives any clues why
it isn't working (it may not use the megatec protocol at all).

On 6/3/06, gypsy <gypsy at iswest.com> wrote:
> gypsy wrote:
> >
> > Carlos Rodrigues wrote:
> > >
> > > On 6/2/06, Manuel Wolfshant <wolfy at nobugconsulting.ro> wrote:
> > > > gypsy wrote:
> > > >
> > > > >The supplied software is Copyrighted by Powercom Co., Ltd. and is named
> > > > >'upsmon' version 0.91a.  In addition there is a 'upsdisp' that uses
> > > > >ncurses to show things like line voltage and load.  The serial cable
> > > > >plus UPS plus the software all work - after a fashion...
>
> Update:  These drivers load without any error messages via 'upsdrvctl
> start'.  When I go back to work, I'll see if one of 'em works.
> al175
> liebert
> victronups
>
> A few others load but with error messages.  I haven't done anything with
> genericups yet.
> --
> gypsy
>
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
>


-- 
Carlos Rodrigues