[Nut-upsuser] SmartLink UPS - Suggestions as to which serial driver?

[gypsy]

Carlos Rodrigues wrote:
> You can start megatec with "-DDD" and see if that gives any clues why
> it isn't working (it may not use the megatec protocol at all).

Correct:
"Megatec protocol UPS not detected."
--
gypsy

> On 6/3/06, gypsy <gypsy at iswest.com> wrote:
> > gypsy wrote:
> > >
> > > Carlos Rodrigues wrote:
> > > >
> > > > On 6/2/06, Manuel Wolfshant <wolfy at nobugconsulting.ro> wrote:
> > > > > gypsy wrote:
> > > > >
> > > > > >The supplied software is Copyrighted by Powercom Co., Ltd. and is named
> > > > > >'upsmon' version 0.91a.  In addition there is a 'upsdisp' that uses
> > > > > >ncurses to show things like line voltage and load.  The serial cable
> > > > > >plus UPS plus the software all work - after a fashion...
> >
> > Update:  These drivers load without any error messages via 'upsdrvctl
> > start'.  When I go back to work, I'll see if one of 'em works.
> > al175
> > liebert
> > victronups
> >
> > A few others load but with error messages.  I haven't done anything with
> > genericups yet.
> > --
> > gypsy