[Nut-upsuser] Trouble Configuring NUT with Gamatronic USB
Eli Wapniarski
eli at orbsky.homelinux.org
Wed Jun 14 12:42:11 UTC 2006
Hi Peter
Thanks for responding.
Running newhidups -DD -u root -x generic -x vendorid=0925 auto produces
Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.3)
Fatal error: 'generic' is not a valid flag for this driver.
However, newhidups -DD -u root -x vendorid=0925 auto
Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.3)
debug level is '2'
Checking device (046D/C20D) (003/004)
- VendorID: 046d
- ProductID: c20d
- Manufacturer: Logitech
- Product: WingMan Attack 2
- Serial Number: unknown
- Bus: 003
Trying to match device
Device does not match - skipping
Checking device (05A9/0518) (003/002)
- VendorID: 05a9
- ProductID: 0518
- Manufacturer: OmniVision Technologies, Inc.
- Product: USB Camera
- Serial Number: unknown
- Bus: 003
Trying to match device
Device does not match - skipping
Checking device (0451/2046) (003/003)
- VendorID: 0451
- ProductID: 2046
- Manufacturer: unknown
- Product: unknown
- Serial Number: unknown
- Bus: 003
Trying to match device
Device does not match - skipping
Checking device (0925/1234) (002/002)
- VendorID: 0925
- ProductID: 1234
- Manufacturer: Richcomm Tech
- Product: UPS2004
- Serial Number: unknown
- Bus: 002
Trying to match device
Device does not match - skipping
Checking device (0000/0000) (002/001)
- VendorID: 0000
- ProductID: 0000
- Manufacturer: Linux 2.6.16-1.2133_FC5smp uhci_hcd
- Product: UHCI Host Controller
- Serial Number: 0000:00:1d.0
- Bus: 002
Trying to match device
Device does not match - skipping
Checking device (0000/0000) (005/001)
- VendorID: 0000
- ProductID: 0000
- Manufacturer: Linux 2.6.16-1.2133_FC5smp uhci_hcd
- Product: UHCI Host Controller
- Serial Number: 0000:00:1d.3
- Bus: 005
Trying to match device
Device does not match - skipping
Checking device (0000/0000) (004/001)
- VendorID: 0000
- ProductID: 0000
- Manufacturer: Linux 2.6.16-1.2133_FC5smp uhci_hcd
- Product: UHCI Host Controller
- Serial Number: 0000:00:1d.2
- Bus: 004
Trying to match device
Device does not match - skipping
Checking device (0000/0000) (001/001)
- VendorID: 0000
- ProductID: 0000
- Manufacturer: Linux 2.6.16-1.2133_FC5smp ehci_hcd
- Product: EHCI Host Controller
- Serial Number: 0000:00:1d.7
- Bus: 001
Trying to match device
Device does not match - skipping
No appropriate HID device found
No matching USB/HID UPS found
I really appreciate this effort.
Eli
> Eli,
>
> Gamatronic is not currently supported by the newhidups driver. You
> have two options:
>
> (1) look at the file data/driver.list or
> http://www.networkupstools.org/compat/ to find a serial driver
> that matches your device, and/or
>
> (2) post the output of
>
> newhidups -DD -u root -x generic -x vendorid=0925 auto
>
> and we'll try to see if any USB driver can be modified to support
> this device.
>
> -- Peter
>
> Eli Wapniarski wrote:
>>
>> Hi
>>
>> I am running FC5 with nut coming from the fc5 extras repositories. I =20
>> am trying to configure a Gamatronic D-Compact ups. The cable that came =20
>> with the ups has a serial connector on one end and a usb on the other.
>>
>> cat /proc/bus/usb/devices produces
>>
>> T: Bus=3D01 Lev=3D01 Prnt=3D01 Port=3D01 Cnt=3D01 Dev#=3D 4
>> Spd=3D1.5 MxCh=
>> =3D 0
>> D: Ver=3D 1.10 Cls=3D00(>ifc ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D 1
>> P: Vendor=3D0925 ProdID=3D1234 Rev=3D 0.01
>> S: Manufacturer=3DRichcomm Tech
>> S: Product=3DUPS2004
>> C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D80 MxPwr=3D100mA
>> I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D03(HID ) Sub=3D00 Prot=3D00
>> Driver=3D=
>> usbhid
>> E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 6 Ivl=3D10ms
>>
>> So the ups is detected. But when I try to run
>>
>> upsdrvctl -u nut start or upsdrvctl -u root start I get
>>
>> Network UPS Tools - UPS driver controller 2.0.3
>> execv: Permission denied
>> Driver failed to start (exit status=3D1)
>>
>>
>> /etc/rc.d/init.d/ups start produces
>>
>> Starting newhidups: Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.3)
>>
>> No matching USB/HID UPS found
>> [FAILED]
>> Starting upsd: Network UPS Tools upsd 2.0.3
>> Can't connect to UPS [Gamatronic] (-auto): No such file or directory
>> Synchronizing........ giving up
>> [ OK ]
>> Starting UPS monitor (master): Network UPS Tools upsmon 2.0.3
>> Using power down flag file /etc/killpower
>>
>>
>> Fatal error: insufficient power configured!
>>
>> Sum of power values........: 0
>> Minimum value (MINSUPPLIES): 1
>>
>> Edit your upsmon.conf and change the values.
>> [FAILED]
>>
>> /etc/sysconfig/ups contains
>>
>> # If the UPS is locally attached set it to "yes"
>> SERVER=3Dyes
>> # Model of the UPS (filename to call for it, without path)
>> # Example - one of
>> # apcsmart - APC SMartUPS and similar
>> # fentonups - Fenton UPS
>> # optiups
>> # bestups
>> # genericups
>> # ups-trust425+625
>> # upsdrvctl
>> # You MUST change this, or set SERVER to "no"
>> # To support multiple drivers, set MODEL=3Dupsdrvctl
>> MODEL=3Dnewhidups
>> # UPS device - needed if UPS is locally attached
>> DEVICE=3Dauto
>> # Any options to pass to $MODEL
>> # ex. for my TrippLite UPS, use
>> # OPTIONS=3D"-t 5"
>> OPTIONS=3D
>> # Any options to pass to upsd
>> UPSD_OPTIONS=3D
>> #
>> # [End]
>>
>> /etc/ups/ups.conf contains
>>
>> [Gamatronic]
>> driver=3D newhidups
>> port =3D auto
>> desc =3D "Gamatronic D-Compact"
>>
>>
>> I tried to modifying /etc/udev/rules.d/nut-usbups.rules to inlcude the =20
>> following lines before LABEL=3D"nut-usbups_rules_end" to include
>>
>> # Gamatronic D-Compact - usbhid-ups
>> SYSFS{idVendor}=3D=3D"0925", SYSFS{idProduct}=3D=3D"1234",
>> MODE=3D"660", GRO=
>> UP=3D"nut"
>>
>> I got the same results. Please help me to get nut configured correctly.
>>
>> Thanks
>>
>> Eli
>>
>> _______________________________________________
>> Nut-upsuser mailing list
>> Nut-upsuser at lists.alioth.debian.org
>> http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
>>
>
>
More information about the Nut-upsuser
mailing list