[Nut-upsuser] upssched does not start the script when timer triggers

[Laurent Lesage]

Hello,

I'm using nut with my MG Ellipse on serial port. No problem since one
year. Two days ago, I wanted to add a phone alert through my asterisk
box when power is down. Since then, upssched doesn't make his job
anymore. here is the "syslog" I get when the power cord is unplugged :

>
> May  9 11:39:34 serveur upsmon[6411]: UPS ellipse at localhost on battery
> May  9 11:39:34 serveur upssched[6823]: Timer daemon started
> May  9 11:39:34 serveur upssched[6823]: New timer: phone_alert (15 
> seconds)
> May  9 11:39:34 serveur upssched[6823]: New timer: onbatt (900 seconds)
> May  9 11:39:49 serveur upssched[6823]: Event: phone_alert
> May  9 11:39:49 serveur upssched[6823]: Execute command failure: 
> /root/scripts/upsalert phone_alert: No such file or directory
> May  9 11:40:19 serveur upsmon[6411]: UPS ellipse at localhost on line power
> May  9 11:40:19 serveur upssched[6823]: Cancelling timer: onbatt



So, the timer works OK but when the scripts si called, it says it
doesn't exist. It worked before without any problem. the path is ok. The
command is ok.

her is my upssched.conf

> # the script to be executed
> CMDSCRIPT /root/scripts/upsalert
>
> # mandatory fields that must be set before AT commands
> PIPEFN /var/run/upssched/upssched.pipe
> LOCKFN /var/run/upssched/upssched.lock
>
> # the timers, here 30 sec after the ONBATT (ups on battery) event
> AT ONBATT * START-TIMER phone_alert 15
> AT ONBATT * START-TIMER onbatt 900
>
> # cancel the countdown if power is back
> AT ONLINE * CANCEL-TIMER onbatt
> AT ONLINE * CANCEL-TIMER phone_alert



Any idea?

thanks ahead

Laurent Lesage