[Nut-upsuser] tripplite_usb interrupt errs

[Eric A. Hall]

On 1/18/2007 9:36 PM, Charles Lepple wrote:
> On 1/18/07, Eric A. Hall <ehall at ehsco.com> wrote:
>> I keep getting this kind of stuff in /var/log/messages
>>
>> Jan 18 17:45:03 bulldog tripplite_usb[9979]: libusb_get_interrupt()
>> returned -110 instead of 8
>>
>> Should I be worried about it? upsc seems to work fine...

> Some of the SMARTPRO models seem to work right off the bat, but there
> have been reports of timeouts.

It's a SMART2200RMXL2U (man I hate typing that out). I run KNut on the
server's gnome console, which complains whenever the signal is lost, and
it hasn't complained except when I break nut.

> Can you post the output of 'upsc' for that UPS? There are some debug
> strings in there that will help track this down.

[ 21:40:42 -- bulldog:/root/ ]
[ root# ] upsc smart2200rmxl2u at localhost
battery.voltage: 13.60
battery.voltage.nominal: 12
driver.name: tripplite_usb
driver.parameter.port: auto
driver.version: 2.0.4
driver.version.internal: 0.6
input.voltage: 119
input.voltage.nominal: 120
ups.debug.D: 37 37 38 38 0d 00 00 '7788...'
ups.debug.M: 30 30 37 44 0d 00 00 '007D...'
ups.debug.S: 31 30 30 00 64 30 0d '100.d0.'
ups.debug.T: 39 45 32 35 37 31 0d '9E2571.'
ups.delay.shutdown: 64
ups.firmware: F1115.B
ups.load: 19
ups.mfr: Tripp Lite
ups.model: SMART2200RMXL2U
ups.power.nominal: 2200
ups.status: OL

Thanks

-- 
Eric A. Hall                                        http://www.ehsco.com/
Internet Core Protocols          http://www.oreilly.com/catalog/coreprot/