[Nut-upsuser] APC Back-UPS ES 550 reports zero(0) load

[Charles Lepple]

On 10/12/07, Arjen de Korte <nut+users at de-korte.org> wrote:
> > Any help or guidance would be appreciated.  If I need to patch the
> > source to add support for the ES 550, I can do that, with a little
> > guidance.
>
> There is nothing we can do about this. According to the output you
> attached (which is great, thanks), the UPS is reporting this.
>
> Path: UPS.PowerConverter.PercentLoad, Type: Feature, ReportID: 0x50,
> Offset: 0, Size: 8, Value: 0.000000

Arjen,

is there a possibility that the descriptor has some strange conversion
that is causing NUT to read this improperly? I don't recall if there
is a way to display the hex values coming back from the device.

-- 
- Charles Lepple