[Nut-upsuser] Mustek PowerMust 848

[Carlos Rodrigues]

Hi,

I'm not the maintainter for the "megatec_usb" driver (in fact, I'm no
longer maintainer for the base "megatec" either), so I don't really
know the status for that particular UPS.

I'm forwarding this to the NUT mailing-list though.

Regards,

-- 
Carlos Rodrigues


On Fri, Dec 5, 2008 at 10:30 AM, Adrian Czerniak
<adrian.czerniak at becomo.com> wrote:
> Hi,
>
> are you going to support Mustek PowerMust 848? I'm not able to run it with
> lastest SVN:
>
> #./megatec_usb -a mustek -DDDDD
> Network UPS Tools 2.3.0-1595 - Megatec protocol driver 1.5.18 [megatec_usb]
> Carlos Rodrigues (c) 2003-2008
>
> Serial-over-USB transport layer for Megatec protocol driver [megatec_usb]
> Andrey Lelikov (c) 2006, Alexander Gordeev (c) 2006-2007, Jon Gough (c) 2007
>
> debug level is '5'
> Checking device (0665/5161) (003/004)
> - VendorID: 0665
> - ProductID: 5161
> - Manufacturer: Cypress Semiconductor
> - Product: USB to Serial
> - Serial Number: unknown
> - Bus: 003
> Trying to match device
> Device matches
> DTR=1, RTS=0
> send_to_all: SETINFO driver.version.internal "1.5.18"
> Starting UPS detection process...
> Asking for UPS information [I]...
> I => FAILED [short read]
> I detail: (1 bytes) => 49
> Asking for UPS status [Q1]...
> 00]_data_phoenix: got so far [Q1
> get_data_phoenix: (8 bytes) => 51 31 0d 2e 30 0d 30 30
> Q1 => FAILED [short read]
> Q1 detail: (2 bytes) => 51 31
> Asking for UPS status [Q1]...
> 00]_data_phoenix: got so far [Q1
> get_data_phoenix: (8 bytes) => 51 31 0d 2e 30 0d 30 30
> Q1 => FAILED [short read]
> Q1 detail: (2 bytes) => 51 31
> Asking for UPS status [Q1]...
> 00]_data_phoenix: got so far [Q1
> get_data_phoenix: (8 bytes) => 51 31 0d 2e 30 0d 30 30
> Q1 => FAILED [short read]
> Q1 detail: (2 bytes) => 51 31
> Asking for UPS status [Q1]...
> 00]_data_phoenix: got so far [Q1
> get_data_phoenix: (8 bytes) => 51 31 0d 2e 30 0d 30 30
> Q1 => FAILED [short read]
> Q1 detail: (2 bytes) => 51 31
> Asking for UPS status [Q1]...
> 00]_data_phoenix: got so far [Q1
> get_data_phoenix: (8 bytes) => 51 31 0d 2e 30 0d 30 30
> Q1 => FAILED [short read]
> Q1 detail: (2 bytes) => 51 31
> 5 out of 5 detection attempts failed (minimum failures: 2).
> Megatec protocol UPS not detected.
>
> --
> Regards,
> Adrian Czerniak
>
>