[Nut-upsuser] problem with Mustek UPS - Freebsd

[Jimmy Jazz]

Hi,

i was using the same device. Just don't try to use the usb and serial
outputs at the same time.

/etc/nut/ups.conf

#[mustekups]
#       driver = megatec
#       port = /dev/ttyS0
#       desc = "Mustek PowerMust 1000VA USB"
#       mfr = "Mustek"
#       model = "PowerMust  1000 USB"
#
#[mustekups-usb]
#       driver = megatec_usb
#       port=auto
#       vendorid = 0665
#       productid = 5161
#       subdriver = "agiler"
#       desc = "Mustek PowerMust 1000VA USB"
#       mfr = "Mustek"
#       model = "PowerMust  1000 USB"

for the serial output in your init.d nut file

set_serial() {
        for n in $@; do
                [ -e /sys/class/tty/ttyS${n} ] || continue
                mknod /dev/ttyS${n} c 4 $(( 64 + n )) && chown nut:uucp
/dev/ttyS${n}
        done
}
set_serial 0 1 2 3 4 5 6

/sbin/upsdrvctl start

or something like this as i'm not used to bsd

Jj


Luki a écrit :
> But I have found my model on driver.list - it's 1000VA - Mustek 
> PowerMust 1000 and I use cable delivered with UPS.
> That's weird, I spent a lot of time trying to solve it :) I got two 
> cables - usb and serial, now I have connected both of them, and I have 
> tried also with megatec_usb driver, no result.
> Winpower is a software delivered by producer, but X's are needed for it, 
> but it's a www server so I don't have X environment installed ( only 
> text mode available ) that's why I want to use NUT.
> I have tryied only NUT, it's a brand new UPS.
> Maybe there is something wrong with my /dev/cuaa0 device... cause 
> normally it should work right ?
>   
>> On Feb 2, 2008 8:20 PM, Luki <looky at poczta.fm> wrote:
>>   
>>     
>>> I have checked that, I have set 777 to cuaa0 -> serial port (COM1)
>>> I have run /usr/local/ups/bin/megatec -DDD -a, results are as follows :
>>>
>>> [root at plus ~]# /usr/local/ups/bin/megatec -DDD -a server
>>> Network UPS Tools  - Megatec protocol driver 1.5.4 [megatec]
>>> Carlos Rodrigues (c) 2003-2007
>>>
>>> debug level is '3'
>>> Starting UPS detection process...
>>> Attempting to detect the UPS...
>>> Sending "Q1" command...
>>> Wrong answer to "Q1" command.
>>> Attempting to detect the UPS...
>>> Sending "Q1" command...
>>> Wrong answer to "Q1" command.
>>> Attempting to detect the UPS...
>>> Sending "Q1" command...
>>> Wrong answer to "Q1" command.
>>> Attempting to detect the UPS...
>>> Sending "Q1" command...
>>> Wrong answer to "Q1" command.
>>> Attempting to detect the UPS...
>>> Sending "Q1" command...
>>> Wrong answer to "Q1" command.
>>> 5 out of 5 detection attempts failed (minimum failures: 2).
>>> Megatec protocol UPS not detected.
>>>
>>>
>>> I am sorry for bothering you, but do you have idea how to solve it ?
>>>     
>>>       
>> That's strange... Maybe you have a bad cable, or that model doesn't
>> use the megatec procotol.
>>
>> What's the name of the software that Mustek ships with that UPS? Have
>> you been able to use the UPS with any software other that NUT (on
>> FreeBSD or any other operating system)?
>>
>> PS: please keep the list CC:ed so that others may have the opportunity
>> to give their 2 cents.
>>
>>   
>>     
>
>
>
> Pogoda na najblizsze dni.
> Sprawdz >>> http://link.interia.pl/f1ce1
>
>
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
>