[Nut-upsuser] Unknown model detected - please report this ID: 'SOLA'

[nut at haddow.info]

thanks Arjen

I found the Man page, have set it up, but still have some problems

this is a log of it :

--------------------------------
battery.charge: 100.0
battery.voltage: 2.27
battery.voltage.nominal: 0.0
driver.name: bestups
driver.parameter.ID:
610,700,240,240,0.0,0.0
driver.parameter.port: /dev/cuaa1
driver.version: 2.0.5
driver.version.internal: 1.03
input.frequency: 49.9
input.voltage: 246.1
output.voltage: 238.0
ups.load: 007
ups.mfr: Best Power
ups.model: 610 700
ups.status: OL
ups.temperature: 27.0
-------------------------------

The config file is :
-------------------------
[sola]
        ID = 610,700,240,240,0.0,0.0
        driver = bestups
        port = /dev/cuaa1

I had to put 0.0,0.0 to stop it from saying it was not charged.

But as you can see:
battery.charge: 100.0
battery.voltage: 2.27
battery.voltage.nominal: 0.0

"battery.voltage" should be alot higher,the win CheckUPSII Says it should
be 27V not 2.27

if I change the last 2 in the ID to be what is ment to "20.0,27.4" i get"
battery.charge: -239.6
battery.voltage: 2.27
battery.voltage.nominal: 27.4
....


Does any one know why it does this





regards


shane
nut