[Nut-upsuser] Need help with Unitek Alpha 1200sx.

[Carlos Rodrigues]

On Jan 2, 2008 8:19 PM, Joseph Borg <juu.borg at gmail.com> wrote:
> No luck unfortunately :-(
>
> -------------------
> [myups]
>         driver = megatec_usb
>         port = auto
>         bus=001
>         vendorid = 0f03
>         productid = 0001
>         subdriver = agiler
>         desc = "Unitek Alpha 1200sx"
> -------------------
> [root at www www]# /sbin/upsdrvctl -DD start
> Network UPS Tools - UPS driver controller 2.2.0-
> Starting UPS: myups
> exec: /sbin/megatec_usb -a myups
> Network UPS Tools 2.2.0- - Megatec protocol driver 1.5.4 [megatec_usb]
> Carlos Rodrigues (c) 2003-2007
>
> Serial-over-USB transport layer for Megatec protocol driver [megatec_usb]
>
> No supported devices found. Please check your device availability with
> 'lsusb'
> and make sure you have an up-to-date version of NUT. If this does not help,
> try running the driver with at least 'vendorid' and 'subdriver' options
> specified. Please refer to the man page for details about these options
> (man 8 megatec_usb).
> Please report your results to the NUT user's mailing list
> <nut-upsuser at lists.alioth.debian.org>.
> -----------------------------
> I've also tried changing the subdriver with no luck. The other options I
> specified I *think* are ok from the lsusb output.
>
> The strange thing is that this fails really fast...it's as though it's not
> even trying to detect the ups....

I'm afraid I can't be of much more help. I'll let the megatec_usb
developers step in.

-- 
Carlos Rodrigues