[Nut-upsuser] Belkin F6H375 not seen by nut 2.2.1

[Joseph Borg]

Apologies for the number of emails; I just tried starting as user root and
the error message changes but the outcome is the same:

---------------
[root at www drivers]# /sbin/upsdrvctl -u root -DDDDD start
Network UPS Tools - UPS driver controller 2.2.0-
Starting UPS: unial1200
exec: /sbin/megatec_usb -a unial1200
Network UPS Tools 2.3.0-1222M - Megatec protocol driver 1.5.11 [megatec_usb]
Carlos Rodrigues (c) 2003-2007

Serial-over-USB transport layer for Megatec protocol driver [megatec_usb]
Andrey Lelikov (c) 2006, Alexander Gordeev (c) 2006-2007, Jon Gough (c) 2007

ser_get_line: Device detached? (error -110: No error)
Successfully reconnected
ser_get_line: Device detached? (error -110: No error)
Successfully reconnected
ser_get_line: Device detached? (error -110: No error)
Successfully reconnected
ser_get_line: Device detached? (error -110: No error)
Successfully reconnected
ser_get_line: Device detached? (error -110: No error)
Successfully reconnected
Megatec protocol UPS not detected.
-------------------

Thought that maybe shed some light...

Cheers,
Joe

On Jan 13, 2008 9:01 PM, Joseph Borg <juu.borg at gmail.com> wrote:

> The permissions seem right to me:
> [root at www drivers]# ll /dev/bus/usb/001
> total 0
> crw-r--r-- 1 root root 189, 0 2008-01-08 14:16 001
> crw-rw-r-- 1 root uucp 189, 1 2008-01-13 21:22 002
>
> The device in question is 002 and these same exact permissions work fine
> sometimes. I had the above permission setup following my original thread and
> they worked fine till the last power cut (4 days ago). uucp is the right
> group since nut is a member of uucp (some Fedora quirk).
>
> Thanks for your help.
> Joe
>
>
> On Jan 13, 2008 8:21 PM, Charles Lepple <clepple at gmail.com> wrote:
>
> > On Jan 13, 2008 2:11 PM, Joseph Borg <juu.borg at gmail.com> wrote:
> > > exec: /sbin/megatec_usb -a unial1200
> > > Network UPS Tools 2.3
> > .0-1222M - Megatec protocol driver 1.5.11 [megatec_usb]
> > >
> > > Carlos Rodrigues (c) 2003-2007
> > >
> > > Serial-over-USB transport layer for Megatec protocol driver
> > [megatec_usb]
> > > Andrey Lelikov (c) 2006, Alexander Gordeev (c) 2006-2007, Jon Gough
> > (c) 2007
> > >
> > > ser_get_line: Device detached? (error -110: error sending control
> > message:
> > > Operation not permitted)
> >
> > "Operation not permitted" for a USB device means that you need to make
> > sure that the hotplug or udev rules are installed - they set up
> > permissions so that the driver can access the USB device.
> >
> > Check scripts/udev/README for more information, and let us know if the
> > manual installation instructions are not correct for Fedora.
> >
> > --
> > - Charles Lepple
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20080113/3053b22a/attachment.htm