[Nut-upsuser] Belkin F6H375 not seen by nut 2.2.1

[Alexander I. Gordeev]

On Mon, 14 Jan 2008 00:10:38 +0300, Joseph Borg <juu.borg at gmail.com> wrote:

> Apologies for the number of emails; I just tried starting as user root and
> the error message changes but the outcome is the same:
>
> ---------------
> [root at www drivers]# /sbin/upsdrvctl -u root -DDDDD start
> Network UPS Tools - UPS driver controller 2.2.0-
> Starting UPS: unial1200
> exec: /sbin/megatec_usb -a unial1200
> Network UPS Tools 2.3.0-1222M - Megatec protocol driver 1.5.11 [megatec_usb]
> Carlos Rodrigues (c) 2003-2007
>
> Serial-over-USB transport layer for Megatec protocol driver [megatec_usb]
> Andrey Lelikov (c) 2006, Alexander Gordeev (c) 2006-2007, Jon Gough (c) 2007
>
> ser_get_line: Device detached? (error -110: No error)
> Successfully reconnected
> ser_get_line: Device detached? (error -110: No error)
> Successfully reconnected
> ser_get_line: Device detached? (error -110: No error)
> Successfully reconnected
> ser_get_line: Device detached? (error -110: No error)
> Successfully reconnected
> ser_get_line: Device detached? (error -110: No error)
> Successfully reconnected
> Megatec protocol UPS not detected.
> -------------------

Please could you provide the output of the actual driver like you did in
your last e-mail in previous thread. It is much better to figure out the
problem!

>
> Thought that maybe shed some light...
>
> Cheers,
> Joe
>

-- 
   Alexander