[Nut-upsuser] Belkin F6H375 not seen by nut 2.2.1

[Joseph Borg]

Hi,
Thanks for looking into this. This is a snippet of the output I get:

-----------------------
[root at www drivers]# ./megatec_usb -DDDDD -u root -a unial1200
Network UPS Tools 2.3.0-1222M - Megatec protocol driver 1.5.11 [megatec_usb]
Carlos Rodrigues (c) 2003-2007

Serial-over-USB transport layer for Megatec protocol driver [megatec_usb]
Andrey Lelikov (c) 2006, Alexander Gordeev (c) 2006-2007, Jon Gough (c) 2007

debug level is '5'
Checking device (0000/0000) (002/001)
- VendorID: 0000
- ProductID: 0000
- Manufacturer: Linux 2.6.23.9-85.fc8 uhci_hcd
- Product: UHCI Host Controller
- Serial Number: 0000:00:07.3
- Bus: 002
Trying to match device
Device does not match - skipping
Checking device (0000/0000) (001/001)
- VendorID: 0000
- ProductID: 0000
- Manufacturer: Linux 2.6.23.9-85.fc8 uhci_hcd
- Product: UHCI Host Controller
- Serial Number: 0000:00:07.2
- Bus: 001
Trying to match device
Device does not match - skipping
Checking device (0F03/0001) (001/002)
- VendorID: 0f03
- ProductID: 0001
- Manufacturer: Ver 1.0
- Product: USB To RS232 Interface (V1.0) BaudRate 2400bps
- Serial Number: unknown
- Bus: 001
Trying to match device
Device matches
Starting UPS detection process...
Asking for UPS status [Q1]...
ser_get_line: Device detached? (error -110: No error)
==================================================
= device has been disconnected, try to reconnect =
==================================================
-------------------------
I get another four repetitions of the same following the above output.

Let me know if if you require any further output and/or if I can further
contribute to get this to work :-).

/Joe

On Jan 14, 2008 7:40 AM, Arjen de Korte <nut+users at de-korte.org> wrote:

>
> > Apologies for the number of emails; I just tried starting as user root
> and
> > the error message changes but the outcome is the same:
> >
> > ---------------
> > [root at www drivers]# /sbin/upsdrvctl -u root -DDDDD start
> > Network UPS Tools - UPS driver controller 2.2.0-
> > Starting UPS: unial1200
> > exec: /sbin/megatec_usb -a unial1200
> > Network UPS Tools 2.3.0-1222M - Megatec protocol driver 1.5.11
> > [megatec_usb]
> > Carlos Rodrigues (c) 2003-2007
> >
> > Serial-over-USB transport layer for Megatec protocol driver
> [megatec_usb]
> > Andrey Lelikov (c) 2006, Alexander Gordeev (c) 2006-2007, Jon Gough (c)
> > 2007
> >
> > ser_get_line: Device detached? (error -110: No error)
> > Successfully reconnected
> > ser_get_line: Device detached? (error -110: No error)
> > Successfully reconnected
> > ser_get_line: Device detached? (error -110: No error)
> > Successfully reconnected
> > ser_get_line: Device detached? (error -110: No error)
> > Successfully reconnected
> > ser_get_line: Device detached? (error -110: No error)
> > Successfully reconnected
> > Megatec protocol UPS not detected.
> > -------------------
> >
> > Thought that maybe shed some light...
>
> In order to get some useful debug info from the driver, don't use
> upsdrvctl to start it, but start it directly through
>
>    /sbin/megatec_usb -DDDDD -a unial1200
>
> Best regards, Arjen
> --
> Eindhoven - The Netherlands
> Key fingerprint - 66 4E 03 2C 9D B5 CB 9B  7A FE 7E C1 EE 88 BC 57
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20080114/a98828b1/attachment.htm