[Nut-upsuser] Belkin F6H375 not seen by nut 2.2.1

[Arjen de Korte]

> Apologies for the number of emails; I just tried starting as user root and
> the error message changes but the outcome is the same:
>
> ---------------
> [root at www drivers]# /sbin/upsdrvctl -u root -DDDDD start
> Network UPS Tools - UPS driver controller 2.2.0-
> Starting UPS: unial1200
> exec: /sbin/megatec_usb -a unial1200
> Network UPS Tools 2.3.0-1222M - Megatec protocol driver 1.5.11
> [megatec_usb]
> Carlos Rodrigues (c) 2003-2007
>
> Serial-over-USB transport layer for Megatec protocol driver [megatec_usb]
> Andrey Lelikov (c) 2006, Alexander Gordeev (c) 2006-2007, Jon Gough (c)
> 2007
>
> ser_get_line: Device detached? (error -110: No error)
> Successfully reconnected
> ser_get_line: Device detached? (error -110: No error)
> Successfully reconnected
> ser_get_line: Device detached? (error -110: No error)
> Successfully reconnected
> ser_get_line: Device detached? (error -110: No error)
> Successfully reconnected
> ser_get_line: Device detached? (error -110: No error)
> Successfully reconnected
> Megatec protocol UPS not detected.
> -------------------
>
> Thought that maybe shed some light...

In order to get some useful debug info from the driver, don't use
upsdrvctl to start it, but start it directly through

    /sbin/megatec_usb -DDDDD -a unial1200

Best regards, Arjen
-- 
Eindhoven - The Netherlands
Key fingerprint - 66 4E 03 2C 9D B5 CB 9B  7A FE 7E C1 EE 88 BC 57