[Nut-upsuser] SNMP error and more

[Olivier Nicole]

Hi,

I just installed NUT to monitor 4 UPS, all APC, all with Network card
APC 9617.

NUT have problem to access the following SNMP OID on all the UPSes:


Detected Smart-UPS 3000 XL on host apc4.cs.ait.ac.th (mib: apcc 1.1)
[apc4] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.2.2.1.2.1: Error in packet: (noSuchName) There is no such variable name in this MIB.
[apc4] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.2.3.1.3.1.1.1: Error in packet: (noSuchName) There is no such variable name in this MIB.
[apc4] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.2.3.1.3.1.1.2: Error in packet: (noSuchName) There is no such variable name in this MIB.
[apc4] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.2.3.1.3.1.1.3: Error in packet: (noSuchName) There is no such variable name in this MIB.
[apc4] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.2.3.1.4.1.1.1: Error in packet: (noSuchName) There is no such variable name in this MIB.
[apc4] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.2.3.1.4.1.1.2: Error in packet: (noSuchName) There is no such variable name in this MIB.
[apc4] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.2.3.1.4.1.1.3: Error in packet: (noSuchName) There is no such variable name in this MIB.
[apc4] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.2.3.1.5.1.1.1: Error in packet: (noSuchName) There is no such variable name in this MIB.
[apc4] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.2.3.1.5.1.1.2: Error in packet: (noSuchName) There is no such variable name in this MIB.
[apc4] Warning: excessive poll failures, limiting error reporting
[apc4] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.3.2.1.2.1: Error in packet: (noSuchName) There is no such variable name in this MIB.
[apc4] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.3.2.1.4.1: Error in packet: (noSuchName) There is no such variable name in this MIB.
[apc4] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.3.3.1.3.1.1.1: Error in packet: (noSuchName) There is no such variable name in this MIB.
[apc4] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.3.3.1.3.1.1.2: Error in packet: (noSuchName) There is no such variable name in this MIB.
[apc4] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.3.3.1.3.1.1.3: Error in packet: (noSuchName) There is no such variable name in this MIB.
[apc4] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.3.3.1.4.1.1.1: Error in packet: (noSuchName) There is no such variable name in this MIB.
[apc4] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.3.3.1.4.1.1.2: Error in packet: (noSuchName) There is no such variable name in this MIB.
[apc4] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.3.3.1.4.1.1.3: Error in packet: (noSuchName) There is no such variable name in this MIB.
[apc4] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.3.3.1.5.1.1.1: Error in packet: (noSuchName) There is no such variable name in this MIB.
[apc4] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.3.3.1.5.1.1.2: Error in packet: (noSuchName) There is no such variable name in this MIB.
[apc4] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.3.3.1.5.1.1.3: Error in packet: (noSuchName) There is no such variable name in this MIB.
[apc4] Warning: excessive poll failures, limiting error reporting
[apc4] nut_snmp_get: .1.3.6.1.4.1.318.1.1.2.1.1.0: Error in packet: (noSuchName) There is no such variable name in this MIB.
[apc4] nut_snmp_get: .1.3.6.1.4.1.318.1.1.2.1.2.0: Error in packet: (noSuchName) There is no such variable name in this MIB.
[apc4] nut_snmp_get: .1.3.6.1.4.1.318.1.1.10.2.3.2.1.4.0: Error in packet: (noSuchName) There is no such variable name in this MIB.
[apc4] nut_snmp_get: .1.3.6.1.4.1.318.1.1.10.2.3.2.1.6.0: Error in packet: (noSuchName) There is no such variable name in this MIB.

I checked and these OID do not exists.

Second question, is there a way to use NUT to monitor and save the
minimum/maximum input voltage on the UPS?

Best regards,

Olivier