[Nut-upsuser] HP/Compaq T700H UPS cable pinout

Kjell Claesson kjell.claesson at epost.tidanet.se
Wed Jan 14 23:46:27 UTC 2009

Den Tuesday 13 January 2009 03.40.58 skrev Mathew McBride:

OK Mathew,
> I managed to obtain the original cable for this UPS, and it turns out,
> according to some poking with a multimeter, that it is a simple straight
> through. I managed to connect the UPS and setup NUT ok.
That is a good thing about the Powerware ups'es that run bcmxcp,
all I tested use a standard cable.

> One thing I would like though: The HP software can display the
> output/load wattage. Is it possible to somehow add this to the variables
> list?
Test the svn trunk revision 1722 driver version 0.19.


More information about the Nut-upsuser mailing list