[Nut-upsuser] Tripplite_usb Driver fail on OMNIVS1500

Chris Abel cabel at wildwood.edu
Fri Sep 4 16:51:55 UTC 2009


Arnaud Quette <aquette.dev at gmail.com> writes:
>ok, before going to deep on this and wasting too much time on
>compilation, I'd like to have:
>- the output of "lsusb -vv -d09ae:0001".
Bus 001 Device 002: ID 09ae:0001 Tripp Lite 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x09ae Tripp Lite
  idProduct          0x0001 
  bcdDevice            0.01
  iManufacturer           1 TRIPP LITE
  iProduct                2 TRIPP LITE UPS                
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           34
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower               60mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      1 Boot Interface Subclass
      bInterfaceProtocol      0 None
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.00
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      52
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval              10
Device Status:     0x0000
  (Bus Powered)
>
>- your USB topology (ie is the UPS plugged on a root hub, are there other
>devices on the same bus, ...)
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 005: ID 05ac:0302 Apple Computer, Inc. Apple Optical Mouse
[Fujitsu]
Bus 001 Device 004: ID 05ac:0204 Apple Computer, Inc. 
Bus 001 Device 003: ID 05ac:1002 Apple Computer, Inc. Apple Extended
Keyboard Hub [Mitsumi]
Bus 001 Device 002: ID 09ae:0001 Tripp Lite 
Bus 001 Device 001: ID 0000:0000
Yes there are other devices on the same bus.
>
>- the result of "ls -l /dev/bus/usb/XXX/YYY" where XXX is the Bus number
>and YYY the Device number as shown by lsubs)
crw-rw-r-- 1 root nut 189, 1 2009-09-04 12:50 /dev/bus/usb/001/002
>
>
>once this part is ok, we'll check again to test 2.4.1 from the source
>tree.

Hope that helps.


___________________________
Chris Abel
Systems and Network Administrator
Wildwood Programs 
2995 Curry Road Extension
Schenectady, NY  12303
518-836-2341




More information about the Nut-upsuser mailing list