[Nut-upsuser] Tripplite_usb Driver fail on OMNIVS1500

Kjell Claesson kjell.claesson at epost.tidanet.se
Tue Sep 8 16:29:36 UTC 2009

Hi Chris,

> Arnaud Quette <aquette.dev at gmail.com> writes:
> >are you sure that you have re executed configure, and that you have the
> >above "build USB drivers: yes" message?
> >don't forget to call make too.
> >I see no reason for not having tripplite_usb if the above are met.
> >please, fix that point first.
> I suspect it is because of my limited knowledge of compiling from source.
> Basically I have the source directory in my home directory. I login as
> root and run this:
> ./configure --with-user=ups --with-group=nut
> --prefix=/usr --exec-prefix=/ --sysconfdir=/etc/nut --mandir=/usr/share/man
>  --libdir=/lib --includedir=/usr/include --without-ssl --with-hal
>  --with-cgi --with-dev --enable-static --with-statepath=/var/run/nut
>  --with-altpidpath=/var/run/nut
> --with-drvpath=/lib/nut --with-cgipath=/usr/lib/cgi-bin/nut
> --with-htmlpath=/usr/share/nut/www --with-pidpath=/var/run/nut
>  --datadir==/usr/share/nut --with-pkgconfig-dir=/usr/lib/pkgconfig

--with-hal is not so good if you going to use the standard setup with driver 
daemon and client.

Set it to  --without-hal

And follow the advice from Arjen about the snmp.

More information about the Nut-upsuser mailing list