[Nut-upsuser] Tripplite_usb Driver fail on OMNIVS1500

[Chris Abel]

I did get this ups working with nut with tripplite_usb. Not exactly sure
what fixed it. I think I had to specify the bus number in ups.conf.

All is well now. I thank everyone for their time.


Charles Lepple <clepple at gmail.com> writes:
>Correct me if I am wrong, but for the Tripp Lite vendor ID (09AE),  
>there are two categories for the product ID:
>
>  - 0001: use tripplite_usb (which is the Tripp Lite serial protocol  
>stuffed over USB HID)
>
>  - anything else: use usbhid-ups (which is HID Power Device Class)
>
>The information that Chris and Leslie posted refers to PID 0001.
>
>Note that the USB PID is completely separate from the  
>"ups.firmware.aux" protocol number that tripplite_usb lists (which  
>also has four digits).
>
>Hope that clears things up a bit.