[Nut-upsuser] Eaton NV 1000H in nut's hardware compatibility list
Arnaud Quette
ArnaudQuette at Eaton.com
Tue Sep 15 08:27:08 UTC 2009
Hi Vitor,
thanks a lot for these info.
I've just added it to the HCL of the Development version (r1989).
I would now be interested in having some more info:
- a driver debug output to check some more things, ie:
$ /path/to/megatec_usb -DDDDD -a eaton
- the device USB VendorID and ProductID (as shown by lsusb)
- when fully charged (ie online for some time), does battery.charge
reaches 100 % ? otherwise, we'll have to use the battvolts parameter.
depending on the answers to the above, we'll possibly have some more
things to do.
cheers,
Arnaud
--
Linux/Unix Expert R&D - Eaton - http://www.eaton.com/mgeops
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer - http://www.debian.org
Free Software Developer - http://arnaud.quette.free.fr/
Le mardi 15 septembre 2009 à 00:07 -0300, Vitor Choi Feitosa a écrit :
> Here's what you asked for:
>
> $ upsc eaton
> battery.charge: 90.0
> battery.voltage: 13.30
> battery.voltage.nominal: 12.0
> driver.name: megatec_usb
> driver.parameter.pollinterval: 2
> driver.parameter.port: auto
> driver.version: 2.2.1-
> driver.version.internal: 1.5.13
> input.frequency: 59.9
> input.voltage: 216.6
> input.voltage.fault: 216.6
> input.voltage.maximum: 222.7
> input.voltage.minimum: 206.0
> output.voltage: 216.6
> output.voltage.nominal: 230.0
> ups.beeper.status: enabled
> ups.delay.shutdown: 0
> ups.delay.start: 2
> ups.load: 21.0
> ups.mfr: unknown
> ups.model: unknown
> ups.serial: unknown
> ups.status: OL
> ups.temperature: 25.0
>
>
> $ upscmd -l eaton
> Instant commands supported on UPS [eaton]:
>
> test.battery.start.deep - Start a deep battery test
> test.battery.start - Start a battery test
> test.battery.stop - Stop the battery test
> shutdown.return - Turn off the load and return when power is back
> shutdown.stayoff - Turn off the load and remain off
> shutdown.stop - Stop a shutdown in progress
> load.on - Turn on the load immediately
> load.off - Turn off the load immediately
> reset.input.minmax - Reset minimum and maximum input voltage status
> reset.watchdog - Reset watchdog timer
> beeper.toggle - Toggle the UPS beeper
>
>
> upsmon wall message
> Broadcast Message from
> nut at cctv
> (somewhere) at
> 12:15 ...
>
> UPS eaton at localhost on battery
>
>
> and finally, a syslog snippet of the system shutting down:
> Sep 14 12:33:20 cctv upsd[6192]: Connection from 127.0.0.1
> Sep 14 12:33:20 cctv upsd[6192]: Client on 127.0.0.1 logged out
> Sep 14 12:33:21 cctv upsmon[6200]: UPS eaton at localhost battery is low
> Sep 14 12:33:21 cctv upsd[6192]: Client local_mon at 127.0.0.1 set FSD on
> UPS [eaton]
> Sep 14 12:33:21 cctv upsmon[6200]: Executing automatic power-fail
> shutdown
> Sep 14 12:33:21 cctv upsmon[6200]: Auto logout and shutdown proceeding
> Sep 14 12:33:22 cctv upsd[6192]: Connection from 127.0.0.1
> Sep 14 12:33:22 cctv upsd[6192]: Client on 127.0.0.1 logged out
> Sep 14 12:33:24 cctv upsd[6192]: Connection from 127.0.0.1
> Sep 14 12:33:24 cctv upsd[6192]: Client on 127.0.0.1 logged out
> Sep 14 12:33:26 cctv upsd[6192]: Host 127.0.0.1 disconnected (read
> failure)
> Sep 14 12:33:26 cctv init: tty4 main process (4901) killed by TERM
> signal
> Sep 14 12:33:26 cctv init: tty5 main process (4902) killed by TERM
> signal
> Sep 14 12:33:26 cctv init: tty2 main process (4904) killed by TERM
> signal
> Sep 14 12:33:26 cctv init: tty3 main process (4906) killed by TERM
> signal
> Sep 14 12:33:26 cctv init: tty1 main process (6445) killed by TERM
> signal
> Sep 14 12:33:26 cctv init: tty6 main process (4908) killed by TERM
> signal
> Sep 14 12:33:28 cctv avahi-daemon[5388]: Got SIGTERM, quitting.
>
>
> Tell me if you need anything else.
>
> Vitor.
>
>
> 2009/9/14 Arnaud Quette <ArnaudQuette at eaton.com>
> Le samedi 12 septembre 2009 à 01:59 -0300, Vitor Choi Feitosa
> a écrit :
> > Hi Arnaud,
>
> Hi Vitor,
>
> > I found your email on the contact page and since you seem to
> work for
> > Eaton and is involved in the NUT community I think you're
> the right
> > person to contact.
> >
> > I've got an Eaton NV 1000H and just installed it here.
> Before NUT
> > configuration I've checked the HCL for my UPS and didn't
> find it
> > there. After trying a few drivers I found that the
> megatec_usb just
> > works for this model.
> >
> > So.. I thought you could arrange to get this model on the
> HCL. Will
> > you do it?
>
>
> sure.
>
> can you just post me the output of:
> - upsc,
> - upscmd,
> - upsrw.
>
> Have you tested a standard shutdown (ie OB until LB, or
> calling "upsmon
> -c fsd")?
>
> thanks for your report.
> Arnaud
> --
> Linux/Unix Expert R&D - Eaton - http://www.eaton.com/mgeops
> Network UPS Tools (NUT) Project Leader -
> http://www.networkupstools.org/
> Debian Developer - http://www.debian.org
> Free Software Developer - http://arnaud.quette.free.fr/
--------------------------------------------------------------------------
Eaton Power Quality SA ~ Siège social:
110 rue Blaise Pascal,
38 334 Saint Ismier, France ~ Lieu d'enregistrement au registre du commerce: Grenoble ~ Numéro d'enregistrement:
302 636 303 ~ Capital social souscrit et liberé:
703'802.75 EUR
More information about the Nut-upsuser
mailing list