[Nut-upsuser] Driver does not detect megatec_usb UPS

[Noel David Torres Taño]

On Lunes 09 Agosto 2010 12:16:39 Charles Lepple escribió:
> On Aug 8, 2010, at 10:11 PM, Noel David Torres Taño wrote:
> > # /lib/nut/blazer_usb -a yukai -u root
> > Network UPS Tools - Megatec/Q1 protocol USB driver 0.03 (2.4.3)
> > Supported UPS detected with megatec protocol
> > Vendor information unavailable
> > Battery runtime will not be calculated (runtimecal not set)
> > 
> > Same with re-created device with correct permissions.
> > 
> > Many thanks
> 
> You're welcome! Check the man page if you would like to try and set
> the runtime calibration constants.

Why does driver end? Must I set something in the ups.conf file?

I think (maybe I'm wrong) that the driver program does not end so you can 
contact it through upsc, but it ends quite fast

Thanks

Noel
er Envite