[Nut-upsuser] Driver does not detect megatec_usb UPS

Charles Lepple clepple at gmail.com
Mon Aug 9 23:25:28 UTC 2010

On Aug 9, 2010, at 11:48 AM, Noel David Torres Taño wrote:

> On Lunes 09 Agosto 2010 12:16:39 Charles Lepple escribió:
>> On Aug 8, 2010, at 10:11 PM, Noel David Torres Taño wrote:
>>> # /lib/nut/blazer_usb -a yukai -u root
>>> Network UPS Tools - Megatec/Q1 protocol USB driver 0.03 (2.4.3)
>>> Supported UPS detected with megatec protocol
>>> Vendor information unavailable
>>> Battery runtime will not be calculated (runtimecal not set)
>>> Same with re-created device with correct permissions.
>>> Many thanks
>> You're welcome! Check the man page if you would like to try and set
>> the runtime calibration constants.
> Why does driver end? Must I set something in the ups.conf file?
> I think (maybe I'm wrong) that the driver program does not end so  
> you can
> contact it through upsc, but it ends quite fast

Are you sure it has terminated? If no major problems are encountered  
during startup, the driver goes into the background.

Try it with "-D" to keep it in the foreground for testing. The options  
common to all drivers are documented in nutupsdrv(8).

More information about the Nut-upsuser mailing list