[Nut-upsuser] Mustek PowerMust 600 USB on Gentoo

[Hristo Iliev]

Thanks - blazer_usb worked nice :)

On 18 November 2010 22:33, Arjen de Korte
<nut+users at de-korte.org<nut%2Busers at de-korte.org>
> wrote:

> Citeren Hristo Iliev <hsiliev at gmail.com>:
>
>
>  I'm trying to setup my Mustek 600 with USB (no serial ports on my
>> computer)
>> on Gentoo. The configuration I use is:
>> [Mustek]
>>  driver = megatec_usb
>>  port = auto
>>  desc = "Power Mustek 600 USB"
>>
>
> The 'megatec_usb' driver is obsolete, please switch to 'blazer_usb'.
>
>
>  The NUT I use on my x86_64 machine is:
>> sys-power/nut-2.4.3-r2  USE="bash-completion ssl usb xml -cgi -hal -snmp"
>>
>> When I start upsdrv I get:
>> weasel ~ # /etc/init.d/upsdrv start -DDDDD
>>
>
> Adding the -DDDDD flags is pointless. If you want to run a driver in debug
> mode, you can't use upsdrvctl (the reason why has been explained numerous
> times before on this list, search the archives).
>
> [...]
>
>
>  dmesg outputs a lot of similar messages for the megatec_usb process:
>> usb 4-2: usbfs: process 20311 (megatec_usb) did not claim interface 0
>> before
>> use
>>
>
> This is typical if multiple processes attempt to claim the same USB device.
> Make sure to kill all megatec_usb (and blazer_usb) drivers before starting a
> new one.
>
> Best regards, Arjen
> --
> Please keep list traffic on the list (off-list replies will be rejected)
>
>
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20101118/ef4a194b/attachment.htm>