[Nut-upsuser] Model list missing my UPS, here is info for inclusion on the list

[Arnaud Quette]

Hello Niels,

thanks a lot for this compatibility submission. This is part of the
remaining things at Eaton.

I've added an entry to the new Hardware Compatibility List:
http://new.networkupstools.org/stable-hcl.html

BTW, have you tested a shutdown with this unit?
Otherwise, you should!

thanks again,
Arnaud Quette


Le samedi 02 octobre 2010 à 12:42 +0200, Niels Kristian Jensen a
écrit : 
> http://www.networkupstools.org/compat/stable.html
> 
> 
> 
> Verified using Ubuntu 10.04 LTS:
> 
> EATON Powerware 5130 using UPS cable works.
> 
> lsusb shows:
> ID 0463:ffff MGE UPS Systems UPS
> 
> 
> nkj at grisen:~$ sudo upsc PingvinUPS
> battery.capacity: 9.00
> battery.charge: 71
> battery.charge.low: 20
> battery.charge.restart: 0
> battery.energysave: no
> battery.protection: yes
> battery.runtime: 2449
> battery.type: PbAc
> device.mfr: EATON
> device.model: 5130 RT 3000
> device.serial: NC302C5031
> device.type: ups
> driver.name: usbhid-ups
> driver.parameter.pollfreq: 30
> driver.parameter.pollinterval: 2
> driver.parameter.port: auto
> driver.version: 2.4.3
> driver.version.data: MGE HID 1.18
> driver.version.internal: 0.34
> input.frequency: 49.0
> input.frequency.extended: no
> input.frequency.nominal: 50
> input.sensitivity: normal
> input.transfer.boost.low: 184
> input.transfer.high: 294
> input.transfer.low: 160
> input.transfer.trim.high: 265
> input.voltage: 233.0
> input.voltage.extended: no
> input.voltage.nominal: 230
> outlet.1.autoswitch.charge.low: 0
> outlet.1.delay.shutdown: 65535
> outlet.1.delay.start: 3
> outlet.1.desc: PowerShare Outlet 1
> outlet.1.id: 1
> outlet.1.status: on
> outlet.1.switchable: yes
> outlet.2.autoswitch.charge.low: 0
> outlet.2.delay.shutdown: 65535
> outlet.2.delay.start: 6
> outlet.2.desc: PowerShare Outlet 2
> outlet.2.id: 2
> outlet.2.status: on
> outlet.2.switchable: yes
> outlet.desc: Main Outlet
> outlet.id: 0
> outlet.switchable: no
> output.current: 0.60
> output.frequency: 49.0
> output.frequency.nominal: 50
> output.powerfactor: 0.00
> output.voltage: 9812.0
> output.voltage.nominal: 230
> ups.beeper.status: enabled
> ups.delay.shutdown: 20
> ups.delay.start: 30
> ups.firmware: 6006AC
> ups.load: 4
> ups.load.high: 105
> ups.mfr: EATON
> ups.model: 5130 RT 3000
> ups.power: 144
> ups.power.nominal: 3000
> ups.productid: ffff
> ups.realpower: 108
> ups.realpower.nominal: 2700
> ups.serial: NC302C5031
> ups.start.auto: yes
> ups.start.battery: yes
> ups.start.reboot: yes
> ups.status: OL CHRG
> ups.test.interval: 604800
> ups.test.result: Done and passed
> ups.timer.shutdown: -1
> ups.timer.start: -1
> ups.type: offline / line interactive
> ups.vendorid: 0463
> 
> Best regards and thank you very much for your efforts,
> Niels Kristian Jensen
> A Scouting and Guiding IT supporter in Denmark

-- 
Linux/Unix Expert R&D - Eaton - http://www.eaton.com/mgeops
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer - http://www.debian.org
Free Software Developer - http://arnaud.quette.free.fr/




--------------------------------------------------------------------------
Eaton Power Quality S.A.S. ~ Siège social: 110 Rue Blaise Pascal, Immeuble Le Viséo - Bâtiment A Innovallée, 38334, Montbonnot St Martin, France ~ Lieu d'enregistrement au registre du commerce: Grenoble ~ Numéro d'enregistrement: 302 636 303  ~ Capital social souscrit et liberé:€ 70380.2749999999939 ~ Numéro de TVA: FR 76 302 636 303