[Nut-upsuser] Plexus 800VA UPS on ReadyNAS Duo
Rojo Alvarez, Álex
alex.rojo at ikusi.com
Tue Aug 14 22:50:26 UTC 2012
Hi again,
I've tried two different langid_fix settings with krauler subdriver and this is what has happened:
--------------------------------------------------------------------
[UPS]
driver = blazer_usb
vendorid = 0001
productid = 0000
port = auto
subdriver = krauler
langid_fix = 0x4095
sweethome:/etc/nut# /lib/nut/blazer_usb -a UPS -u root -DDD
Network UPS Tools - Megatec/Q1 protocol USB driver 0.08 (2.6.4)
0.000000 debug level is '3'
0.000655 language ID workaround enabled (using '0x4095')
0.169315 Checking device (1D6B/0001) (005/001)
0.169369 - VendorID: 1d6b
0.169376 - ProductID: 0001
0.169381 - Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
0.169386 - Product: UHCI Host Controller
0.169391 - Serial Number: 0000:00:10.3
0.169396 - Bus: 005
0.169401 Trying to match device
0.169416 Device does not match - skipping
0.169425 Checking device (1D6B/0001) (004/001)
0.169447 - VendorID: 1d6b
0.169453 - ProductID: 0001
0.169458 - Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
0.169463 - Product: UHCI Host Controller
0.169468 - Serial Number: 0000:00:10.2
0.169473 - Bus: 004
0.169478 Trying to match device
0.169484 Device does not match - skipping
0.169491 Checking device (1D6B/0001) (003/001)
0.169512 - VendorID: 1d6b
0.169517 - ProductID: 0001
0.169522 - Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
0.169528 - Product: UHCI Host Controller
0.169532 - Serial Number: 0000:00:10.1
0.169538 - Bus: 003
0.169542 Trying to match device
0.169548 Device does not match - skipping
0.169555 Checking device (0001/0000) (002/005)
0.206690 - VendorID: 0001
0.206702 - ProductID: 0000
0.206707 - Manufacturer: ATCL FOR UPS
0.206712 - Product: ATCL FOR UPS
0.206717 - Serial Number: ATCL FOR UPS
0.206722 - Bus: 002
0.206726 Trying to match device
0.206765 Device matches
0.219692 First supported language ID: 0x409 (please report to the NUT maintainer!)
0.219716 Trying megatec protocol...
0.219722 send: Q1
0.222708 read: error sending control message: Broken pipe
0.225691 Stall condition cleared
0.225700 blazer_status: short reply
0.225705 Status read 1 failed
0.225710 send: Q1
0.228696 read: error sending control message: Broken pipe
0.231691 Stall condition cleared
0.231699 blazer_status: short reply
0.231704 Status read 2 failed
0.231709 send: Q1
0.234695 read: error sending control message: Broken pipe
0.236690 Stall condition cleared
0.236699 blazer_status: short reply
0.236704 Status read 3 failed
0.236709 Trying mustek protocol...
0.236714 send: QS
0.236719 read: QS
0.236729 blazer_status: short reply
0.236734 Status read 1 failed
0.236739 send: QS
0.236743 read: QS
0.236748 blazer_status: short reply
0.236753 Status read 2 failed
0.236758 send: QS
0.236762 read: QS
0.236767 blazer_status: short reply
0.236772 Status read 3 failed
0.236777 Trying megatec/old protocol...
0.236782 send: D
0.236787 read: D
0.236791 blazer_status: short reply
0.236796 Status read 1 failed
0.236801 send: D
0.236806 read: D
0.236810 blazer_status: short reply
0.236816 Status read 2 failed
0.236820 send: D
0.236825 read: D
0.236830 blazer_status: short reply
0.236835 Status read 3 failed
0.236839 Trying zinto protocol...
0.236844 send: Q1
0.239696 read: error sending control message: Broken pipe
0.242691 Stall condition cleared
0.242699 blazer_status: short reply
0.242704 Status read 1 failed
0.242709 send: Q1
0.244695 read: error sending control message: Broken pipe
0.247691 Stall condition cleared
0.247699 blazer_status: short reply
0.247704 Status read 2 failed
0.247709 send: Q1
0.250695 read: error sending control message: Broken pipe
0.252693 Stall condition cleared
0.252702 blazer_status: short reply
0.252707 Status read 3 failed
0.252712 No supported UPS detected
--------------------------------------------------------------------
[UPS]
driver = blazer_usb
vendorid = 0001
productid = 0000
port = auto
subdriver = krauler
langid_fix = 0x409
sweethome:/etc/nut# /lib/nut/blazer_usb -a UPS -u root -DDD
Network UPS Tools - Megatec/Q1 protocol USB driver 0.08 (2.6.4)
0.000000 debug level is '3'
0.000703 language ID workaround enabled (using '0x409')
0.170975 Checking device (1D6B/0001) (005/001)
0.171053 - VendorID: 1d6b
0.171059 - ProductID: 0001
0.171064 - Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
0.171069 - Product: UHCI Host Controller
0.171074 - Serial Number: 0000:00:10.3
0.171079 - Bus: 005
0.171084 Trying to match device
0.171104 Device does not match - skipping
0.171114 Checking device (1D6B/0001) (004/001)
0.171137 - VendorID: 1d6b
0.171143 - ProductID: 0001
0.171148 - Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
0.171153 - Product: UHCI Host Controller
0.171157 - Serial Number: 0000:00:10.2
0.171162 - Bus: 004
0.171166 Trying to match device
0.171172 Device does not match - skipping
0.171180 Checking device (1D6B/0001) (003/001)
0.171202 - VendorID: 1d6b
0.171208 - ProductID: 0001
0.171212 - Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
0.171217 - Product: UHCI Host Controller
0.171222 - Serial Number: 0000:00:10.1
0.171227 - Bus: 003
0.171231 Trying to match device
0.171237 Device does not match - skipping
0.171244 Checking device (0001/0000) (002/005)
0.208704 - VendorID: 0001
0.208713 - ProductID: 0000
0.208718 - Manufacturer: ATCL FOR UPS
0.208723 - Product: ATCL FOR UPS
0.208727 - Serial Number: ATCL FOR UPS
0.208732 - Bus: 002
0.208736 Trying to match device
0.208777 Device matches
0.221704 First supported language ID: 0x409 (please report to the NUT maintainer!)
0.221726 Trying megatec protocol...
0.221732 send: Q1
0.224722 read: error sending control message: Broken pipe
0.227705 Stall condition cleared
0.227713 blazer_status: short reply
0.227719 Status read 1 failed
0.227724 send: Q1
0.230709 read: error sending control message: Broken pipe
0.233704 Stall condition cleared
0.233712 blazer_status: short reply
0.233717 Status read 2 failed
0.233722 send: Q1
0.236708 read: error sending control message: Broken pipe
0.238704 Stall condition cleared
0.238712 blazer_status: short reply
0.238716 Status read 3 failed
0.238721 Trying mustek protocol...
0.238726 send: QS
0.238731 read: QS
0.238741 blazer_status: short reply
0.238745 Status read 1 failed
0.238750 send: QS
0.238755 read: QS
0.238759 blazer_status: short reply
0.238763 Status read 2 failed
0.238768 send: QS
0.238773 read: QS
0.238777 blazer_status: short reply
0.238782 Status read 3 failed
0.238787 Trying megatec/old protocol...
0.238791 send: D
0.238796 read: D
0.238800 blazer_status: short reply
0.238805 Status read 1 failed
0.238809 send: D
0.238814 read: D
0.238818 blazer_status: short reply
0.238823 Status read 2 failed
0.238827 send: D
0.238832 read: D
0.238836 blazer_status: short reply
0.238841 Status read 3 failed
0.238845 Trying zinto protocol...
0.238850 send: Q1
0.241709 read: error sending control message: Broken pipe
0.244704 Stall condition cleared
0.244712 blazer_status: short reply
0.244717 Status read 1 failed
0.244722 send: Q1
0.246708 read: error sending control message: Broken pipe
0.249704 Stall condition cleared
0.249712 blazer_status: short reply
0.249717 Status read 2 failed
0.249722 send: Q1
0.252710 read: error sending control message: Broken pipe
0.255704 Stall condition cleared
0.255814 blazer_status: short reply
0.255918 Status read 3 failed
0.255996 No supported UPS detected
--------------------------------------------------------------------
Is there any other option I could try?
best regards
Alex
On 14/08/2012, at 22:54, Arnaud Quette wrote:
2012/8/13 Rojo Alvarez, Álex <alex.rojo at ikusi.com<mailto:alex.rojo at ikusi.com>>
Hi, this is the output of the command you asked for. THANKS!!!!
sweethome:~# lsusb -v -d0001:0000
(...)
try again with subdriver=krauler and langid_fix in ups.conf:
http://www.networkupstools.org/docs/man/blazer.html
cheers,
Arno
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20120814/94261bea/attachment-0001.html>
More information about the Nut-upsuser
mailing list