[Nut-upsuser] setup apc pcnet apc9616

[Arnaud Quette]

Hi,

please keep the traffic on the list!

2012/11/30 Periko Support <pheriko.support at gmail.com>

> On Fri, Nov 30, 2012 at 12:01 PM, Arnaud Quette <aquette.dev at gmail.com>
> wrote:
> >
> > 2012/11/30 Periko Support <pheriko.support at gmail.com>
> >>
> >>  Hi friends.
> >>
> >>     Searching for info about how to setup acp pcnet card on nut?
> >>
> >>  Any info will be accepted, thanks!!!
> >
> >
> > is it an SNMP card?
> > if yes, then use snmp-ups, otherwise, I'll need more info.
> > in all case, please report your results.
> >
> > cheers,
> > Arnaud
> > --
> > NUT (Network UPS Tools) Project Leader - http://www.networkupstools.org
> > Debian Developer - http://www.debian.org
> > Free Software Developer - http://arnaud.quette.fr
> >
>
> The UPS have snmp v1 enable.
> Right now with apcupsd is working but in pfsense I just have NUT them
> I want to know how can I access my ups.
> Any info will be appreciated.
> Thanks!!!
>

as told, you need the snmp-ups driver.
put something like the following in your ups.conf file:
[myups]
    driver = snmp-ups
    port = <SNMP agent IP address>
    community = <community>

for more information on snmp-ups:
http://www.networkupstools.org/docs/man/snmp-ups.html

there is also plenty of docs on NUT configuration for pfsense...

success report is welcome since 9616 us not currently listed in our
supported cards.

cheers,
Arnaud
-- 
NUT (Network UPS Tools) Project Leader - http://www.networkupstools.org
Debian Developer - http://www.debian.org
Free Software Developer - http://arnaud.quette.fr
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20121205/55ec646f/attachment.html>