[Nut-upsuser] setup apc pcnet apc9616

[Periko Support]

I will update the list, thanks!!!

On Wed, Dec 5, 2012 at 12:04 PM, Arnaud Quette <aquette.dev at gmail.com> wrote:
> Hi,
>
> please keep the traffic on the list!
>
>
> 2012/11/30 Periko Support <pheriko.support at gmail.com>
>>
>> On Fri, Nov 30, 2012 at 12:01 PM, Arnaud Quette <aquette.dev at gmail.com>
>> wrote:
>> >
>> > 2012/11/30 Periko Support <pheriko.support at gmail.com>
>> >>
>> >>  Hi friends.
>> >>
>> >>     Searching for info about how to setup acp pcnet card on nut?
>> >>
>> >>  Any info will be accepted, thanks!!!
>> >
>> >
>> > is it an SNMP card?
>> > if yes, then use snmp-ups, otherwise, I'll need more info.
>> > in all case, please report your results.
>> >
>> > cheers,
>> > Arnaud
>> > --
>> > NUT (Network UPS Tools) Project Leader - http://www.networkupstools.org
>> > Debian Developer - http://www.debian.org
>> > Free Software Developer - http://arnaud.quette.fr
>> >
>>
>> The UPS have snmp v1 enable.
>> Right now with apcupsd is working but in pfsense I just have NUT them
>> I want to know how can I access my ups.
>> Any info will be appreciated.
>> Thanks!!!
>
>
> as told, you need the snmp-ups driver.
> put something like the following in your ups.conf file:
> [myups]
>     driver = snmp-ups
>     port = <SNMP agent IP address>
>     community = <community>
>
> for more information on snmp-ups:
> http://www.networkupstools.org/docs/man/snmp-ups.html
>
> there is also plenty of docs on NUT configuration for pfsense...
>
> success report is welcome since 9616 us not currently listed in our
> supported cards.
>
>
> cheers,
> Arnaud
> --
> NUT (Network UPS Tools) Project Leader - http://www.networkupstools.org
> Debian Developer - http://www.debian.org
> Free Software Developer - http://arnaud.quette.fr
>