[Nut-upsuser] Setting ups.delay.shutdown in powerware 9135
aquette.dev at gmail.com
Fri Jan 20 15:15:27 UTC 2012
2012/1/19 Jorge Infante <joluinfante at gmail.com>:
> I'm using nut to control a ups powerware 9135.
> All are working, but, in the shutdown, the ups don't poweroff.
> I did check with upsc, and I can't see a ups.delay.shutdown variable to set
> the time of automatic poweroff, when I did complete the shutdown of
> Before, I did use a propietary program to work with this ups, and the daemon
> did poweroff the ups without problems.
> But, now, I have only a openfiler based machine, and the propietary program
> don't run (but, I did find nut to replace it).
> Can any help me?
sure, but I'll need some more information:
- which Openfiler version are you using?
- which NUT version and driver (or port of your UPS) are you using?
- any configuration files, and more specifically, upsmon.conf (trimmed
- upsc/upsrw/upscmd outputs.
I would also need to see the system halt script (/etc/init.d/halt) or
equivalent on Openfiler, to see how the nut script gets called to
poweroff the UPS.
I've not been able to find the sources, so any pointer to it would be
Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer - http://www.debian.org
Free Software Developer - http://arnaud.quette.free.fr/
More information about the Nut-upsuser