[Nut-upsuser] Bug#671444: LiebertPSP

[Arnaud Quette]

2012/6/10 Tim Gould <tgould at reverb.com.au>

> I upgraded to trunk (3652) - it worked, but again with the seemingly
> spurious RB during DISCHRG.
>

more than a upsd trace, we need usbhid-ups (-DDDDD) to be able to see
what's going on...
Ie, is the device actually reporting RB
(UPS.PowerSummary.PresentStatus.NeedReplacement == 1...) or not.


> -DDD output attached. RB turns up just before battery.charge.low is
> reached (around 1551 sec), at the same time LB turns up too.
>
> Once a slave client (on the same UPS) shuts down battery.charge goes back
> up above battery.charge.low, so LB goes away, but RB stays.
>
> I didn't have upsmon running on this host so it ran until the battery was
> depleted rather than shutting down.
>

the above use case should not be a problem, since an initiated shutdown
(master + slave) will go to the completion.
a variation, where the above result is desired, is load shedding, where you
want to shutdown non critical loads, to get more runtime for the critical
ones...


> Hope this helps, thanks, Tim.
>

it indeed helps, thanks Tim.

cheers,
Arnaud
-- 
Linux / Unix / Opensource Engineering Expert - Eaton -
http://opensource.eaton.com
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org
Debian Developer - http://www.debian.org
Free Software Developer - http://arnaud.quette.free.fr
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20120611/cea6b7f6/attachment.html>