[Nut-upsuser] APC SmartUPS 3000VA LCD not connecting

[Zach La Celle]

On 03/08/2012 02:37 PM, Arnaud Quette wrote:
> 2012/3/7 Zach La Celle <lacelle at roboticresearch.com>:
>> On 3/7/2012 11:53 AM, Arnaud Quette wrote:
>>>
>>> 2012/3/5 Zach La Celle<lacelle at roboticresearch.com>:
>>>>
>>>> Still getting the usbhid-ups Report 89 / Report 90 issues...output below.
>>>
>>> hem, there was a bug in the developer, mixing hexa and decimal :-/
>>> the reportIDs are really hexa!
>>>
>>> a better patch is attached, same data needed than before please.
>>>
>>> cheers,
>>> Arno
>>
>>
>> Looks like you have good hex for the reportIDs at the bottom of usbhid-ups
>> output.
> 
> indeed, and it only confirms that we're not missing anything.
> I'm still not sure about those 2 reports purpose.
> we may investigate this to see if there's more data out there.
> 
> sorry, nothing to do about line frequency, load percentage, and temperature.
> (apart from changing your UPS for something else ;-)
> these are simply not reported by your unit!
> 
> cheers,
> Arnaud

My final response (for completeness) for this issue is to say that I
purchased the AP9620 legacy adapter card, and using the apcsmart driver
I now receive all of the information I got from the older UPS.  So, if
anybody else is in this situation, that is one option.

-Zach