[Nut-upsuser] NUT 2.6.3-1 Windows package

[Dmitry Ogorodnikov]

Hello,

snmp-ups won't run without libnetsnmp-30.dll, but NUT doesn't contain
such file, and I can't find it over the Internet.

Renaming libnetsnmp.dll to libnetsnmp-30.dll doesn't work, snmp-ups
runs but can't connect to my Symmetra.

C:\NUT\bin>snmp-ups -a central
Network UPS Tools - Generic SNMP UPS driver 0.66 (2.6.3-3534:3540M)
No matching MIB found for sysOID '.1.3.6.1.4.1.318.1.3.23.1'!
Please report it to NUT developers, with an 'upsc' output for your device.
Going back to the classic MIB detection method.
Detected Symmetra 48K on host 10.35.200.80 (mib: apcc 1.1)

... and stucks.

C:\NUT\bin>upsc central
Error: Connection failure: Unknown error

My ups.conf:

[central]
  driver = snmp-ups
  port = 10.35.200.80
  community = public

Is snmp-ups implemented in Windows? If yes, where can I find libnetsnmp-30.dll?

Thanks.

Regards,
Dmitry.

2012/4/27 Frédéric Bohé <fredericbohe at eaton.com>:
> Hello all,
>
> There is a new Windows package of NUT.
>
> It now contains nut-scanner binary.
>
> Note that there is a known issue with libupsclient.dll with nut-scanner.
> The scan of NUT servers using nut-scanner will not work for now.
>
> You can find it at :
> http://www.networkupstools.org/source/2.6/NUT-Installer-2.6.3-1.msi
>
> Please send feedback to the list.
>
> Regards,
> Fred
>
> --
> Team Open Source Eaton - http://powerquality.eaton.com
>
> --------------------------------------------------------------------------
>
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at lists.alioth.debian.org
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser