[Nut-upsuser] CyberPower DX600E won't switch up after power

[Franck]

> Subject: [Nut-upsuser] CyberPower DX600E won't switch up after power
> 	is back
> Message-ID: <3c530815d1ea602efdfec0d67eb1e0b1 at secretfatty.net>
> Content-Type: text/plain; charset=UTF-8; format=flowed
>
> Hello
> I have an issue with an CyberPower DX600E,
> it doesn't switch up when the power is back; after it has been
> unloaded;
> is it because of one of those variables ?
> regards
> Franck
>
> #upsc myups
> battery.charge: 100
> battery.charge.low: 10
> battery.charge.warning: 20
> battery.mfr.date: CPS
> battery.runtime: 1380
> battery.runtime.low: 300
> battery.type: PbAcid
> battery.voltage: 4.7
> battery.voltage.nominal: 12
> device.mfr: CPS
> device.model: DX600E
> device.type: ups
> driver.name: usbhid-ups
> driver.parameter.pollfreq: 30
> driver.parameter.pollinterval: 2
> driver.parameter.port: auto
> driver.version: 2.4.3
> driver.version.data: CyberPower HID 0.3
> driver.version.internal: 0.34
> input.transfer.high: 0
> input.transfer.low: 0
> input.voltage: 230.0
> input.voltage.nominal: 230
> output.voltage: 238.0
> ups.beeper.status: enabled
> ups.delay.shutdown: 20
> ups.delay.start: 30
> ups.load: 31
> ups.mfr: CPS
> ups.model: DX600E
> ups.productid: 0501
> ups.realpower.nominal: 360
> ups.status: OL
> ups.timer.shutdown: -60
> ups.timer.start: 0
> ups.vendorid: 0764
>
>
> ---
> I'm http://secretfatty.net CEO, bitch !
>
>

Am i suppose to run a "shutdown.return" command ?

Does it make sense to do it in the script triggering (for example when 
receiving "low battery" ?